Search
December 12, 2024

Posted on

FERC Demand Response Standards Leave Industrials, Bowring Unhappy

By Rich Heidorn Jr.
PJM Insider

WASHINGTON, D.C. (Feb. 22, 2013) – The Federal Energy Regulatory Commission yesterday enacted new standards for measuring demand response and energy efficiency in PJM and other organized markets, rejecting objections from industrial customers who said the rules will hurt their efforts to participate.

PJM Independent Market Monitor Joseph Bowring also had raised concerns about the standards, saying they failed to distinguish between energy and capacity markets and could undermine PJM’s efforts to eliminate “double counting.”

The new rules add definitions and business practices to existing standards while leaving regions flexibility to tailor the specifications. The commission said the new standards, developed by stakeholders through the North American Energy Standards Board (NAESB), will reduce transaction costs and increase incentives for demand response and energy efficiency resources to participate in PJM and other RTO and ISO markets.

Incremental Improvement

The commission order (Order 676-G, Docket # RM05-5-20) acknowledged the new standards represented only an “incremental” improvement over the initial NAESB standards approved by the commission in 2010, and encouraged stakeholders to continue refining the measures.

The measures, built in part on those already in use in PJM and ISO New England, were generally supported by generators and transmission owners, while demand response aggregators told the commission they didn’t go far enough in standardizing rules across regions. Industrial customers complained that that the NAESB process was stacked in favor of generators — which are struggling to maintain revenues in the face of a sluggish economy and low natural gas prices — and against industrials, whose potential to reduce peak demand could pinch revenues even further.

Industrial Customers Object

The PJM Industrial Customer Coalition and the Industrial Energy Consumers of America (IECA) said the rules were appropriate for commercial customers, whose energy use is highly correlated with weather, but not for steel mills, plastics manufacturers and other large energy users whose energy use is driven by production schedules. Given the right incentives, industrials said, such users could delay production during a heat wave, reducing peak demand and prices.

But IECA acknowledged that it had not taken part in the multi-year NAESB drafting process and said that only “a handful” of individual industrials were involved. As a result, NAESB never considered the industrials’ call for adoption of industry-developed coincidence factors in evaluating energy efficiency.

Industrials complained current RTO requirements that coincidence factors be validated for each project created a costly barrier to their participation. IECA said that PJM’s “overly prescriptive” process for verifying energy efficiency projects result in costs that exceed the potential benefits to manufacturers.

The commission rejected the industrials’ request that it order RTOs to consider the industry-developed factors but said NAESB should continue to work on baselines that are more accurate for highly-variable load and consider whether the standards should distinguish between capacity and energy products — a concern raised by Bowring.

Concerns from PJM’s Market Monitor

Bowring told the commission that the NAESB standards were “more likely to create confusion than resolve it” because they do not differentiate metrics appropriate to energy demand from those for capacity.

Bowring said the standards threatened to undermine years of work by PJM stakeholders to eliminate the risk of gaming and “double counting” of demand response efforts.

In Docket No. ER11-3322-000, the commission approved using Peak Load Contribution as the fundamental measurement for evaluating reductions in capacity. Bowring said the NAESB standards “appear to conflict with and undermine the clear recognition of this fundamental metric.”

In its own filing, PJM Interconnection disagreed with Bowring’s concern, saying its existing methodologies “are compatible with the NAESB Standards.” The commission ruled that in the event of any conflicts between NAESB standards and RTO/ISO rules, the regions’ governing documents will take precedence.

The order will take effect 60 days after publication in the Federal Register. The commission said regions must make a tariff filing incorporating the standards by Dec. 31, 2013.

A pdf of this article is available for printing: FERC ruling on demand response verification – 2013-02-22

Posted on

FERC Rebuff of Duke Could Mean Closer Ties with PJM

By Rich Heidorn Jr.

WASHINGTON, DC (Feb. 21, 2013) — Duke Energy may be the biggest utility in the U.S., but the Federal Energy Regulatory Commission says it still needs a date to the Order 1000 ball. Could it be PJM?

FERC Chairman Jon Wellinghoff floated that suggestion today after the commission rejected Duke’s attempt to comply with Order 1000 through a transmission planning region covering only Duke, newly acquired Progress Energy and 21 miles of transmission connecting them to Alcoa Power Generating’s Yadkin hydroelectric plant (ER13-83-000).

In 2005, Duke and Progress formed the North Carolina Transmission Planning Collaborative (NCTPC) to comply with FERC Order 890, the predecessor to Order 1000. The July 2012 merger with Progress made Duke the nation’s largest electric utility holding company. Duke argued that its new territory — larger than that of some Regional Transmission Organizations and including parts of North Carolina, South Carolina, Indiana, Ohio, Kentucky and Florida — made it sufficiently large to meet Order 1000’s requirements as a transmission planning region.

But the commission said the size of the region, and the fact that Duke and Progress are treated separately by North Carolina regulators, was irrelevant. “The notion that a compliant transmission planning region can be comprised of two `transmission providers’ that report to the same senior management, board of directors, and shareholders runs counter to Order No. 1000’s requirement that transmission planning occur on a regional rather than on an individual utility level, and would undermine the very reforms the Commission intended to achieve in Order No. 1000,” the order said.

The order, which requires Duke to file a new compliance plan within 90 days, did not suggest where the company might look for regional planning partners who would meet FERC requirements.  In a press conference after the ruling, however, Wellinghoff suggested Duke could look to PJM, along with Southern Company and utilities in South Carolina. “I think there’s plenty of opportunities for them,” Wellinghoff said.

Duke spokesman Dave Scanzoni declined to comment on how the company will respond to FERC’s rebuff.

PJM spokeswoman Paula DuPont-Kidd also declined to comment on the impact of the ruling but added: “Generally, we would welcome the opportunity to enhance our operating and planning efficiencies with any of our neighbors in the Eastern Interconnection.” Separately, PJM is working on development of an interregional planning process with the Midwest ISO and New York ISO with a compliance filing due April 11.

Although six Duke affiliates are members of PJM, and the company trades with the PJM region, the company seems more likely to look to its southern neighbors, which like North Carolina, do not have retail choice or organized wholesale markets.  In its compliance filing, Duke said it could join only the Southeastern Regional Transmission Planning Process (SERTP) or the South Carolina Regional Transmission Planning Process (SCRTP).

Still, Duke and PJM have increased their collaboration over the last several years. PJM and Duke Energy Carolinas have operated under a reliability coordination agreement and a locational interface pricing agreement since 2007. On January 1, 2012, the Duke Energy Ohio/Kentucky region joined the PJM footprint. Independent Market Monitor Joseph Bowring said last fall that PJM should terminate and perhaps renegotiate the 2005 Joint Operating Agreement it signed with Progress Energy Carolinas because the way the Progress generation fleet is dispatched has changed as a result of the Duke-Progress merger.

The Duke order, and a second ruling exempting Maine Public Service Company (ER13-85-000) from the regional planning requirements, were the commission’s first decisions on compliance filings resulting from Order 1000, which seeks to spur new transmission and open competition to independent transmission developers. The commission waived the planning requirements for the small Maine utility because it is connected to the U.S. electric grid only indirectly through Canada.