Page 1378 – RTO Insider

January 24, 2017

SPP Markets and Operations Policy Committee Briefs

DALLAS — SPP’s Markets and Operations Policy Committee last week overwhelmingly approved a Tariff revision request that would replace the old capacity margin terminology with a 12% planning reserve margin requirement, the RTO’s first such change since 1998.

SPP MOPC Markets and Operations Policy Committee — Richard Ross, AEP | © *RTO Insider*

The Regional Tariff Working Group’s (RTWG) RR 187 also incorporates previously approved policies that identify who is responsible for resource adequacy, the resource adequacy requirement and how and when the requirement can be and should be met.

The Capacity Margin Task Force, which spent two years developing the policies, expects that lowering the planning reserve margin (PRM) from 13.6% will reduce SPP’s capacity needs by about 900 MW and save members $1.35 billion over 40 years. (See SPP to Cut Planning Reserve to 12%, Reduce Capacity Needs by 900 MW.)

The policies will become effective this summer pending final approval from the SPP Regional State Committee and the Board of Directors/Members Committee next week and a filing at FERC, with the exception of the resource adequacy assurance policy, or the enforcement mechanism. That policy requires entities short on their PRMs to make payments to entities with excess capacity, based on forecast information.

The RTWG suggested using 2017 as a trial run.

A deliverability study is currently being prepared for the summer. It gives load-responsible entities another option to use “deliverable” capacity on a short-term basis for meeting their planning requirements, instead of requiring firm transmission service. Firm service is still required for load and available for PRM capacity.

“This is a super set of work by the task force and the RTWG, and we need to move forward with it,” American Electric Power’s Richard Ross said. “If somebody needs to fix something, they can prepare a revision request and send it through the [stakeholder] process.”

Tenaska cast the lone dissenting vote against the measure, while nine other members abstained. Eight members abstained when the revision was voted out of the RTWG.

The policies were established by the Capacity Margin Task Force, which then turned the work of drafting a revision request over to the RTWG. The working group estimated that it spent 93 meeting hours on its work, with 20 to 25 attendees at every meeting.

Regional Cost Allocation Remedies Rejected

Ross said he would use the same stakeholder process to appeal the MOPC’s rejection of a business practice that documents the potential Regional Cost Allocation Review (RCAR) remedies and clarifies the process to be used when implementing a remedy.

The measure failed when it received only 58.5% favorable votes, against 17 opposing votes and 12 abstentions.

Ross said he would take his appeal to the board next week.

“I’m comfortable where it is, personally, for my company,” Ross told the SPP Strategic Planning Committee on Thursday. “But we shouldn’t kill it at that stage without other [Regional State Committee] members and the directors having a chance to weigh in on it.”

Originally written as a Tariff revision and rejected by FERC over a lack of detail, RR 155 outlines the processes for analyzing, approving and implementing potential remedies for transmission-pricing zones that fall below the RCAR process’s approved threshold.

Several working groups passed the revision request, but with opposition. Some stakeholders felt the practice was “deficient” in how remedies would be implemented, Ross said. The remedies include accelerating planned upgrades, zonal transfers to offset costs or a lack of benefits to a zone, and changing cost-allocation percentages.

“The major concern was if it’s put in the Tariff, it would simply be implemented without an ability to object,” Ross said. “Putting it in a business practice should not take away the rights to object at FERC.”

“Turning it into a business practice remains our major opposition to this,” said Southwestern Public Service’s Bill Grant. “We protested this at FERC. We don’t think it’s needed. We would prefer going through the regular planning process and if there’s a solution there, to go forward with it.”

Speaking for the city of Springfield, Mo., which has been hampered by a low benefit-to-cost ratio in its zone, Jeff Knottek said he would support the measure.

“This language has been around for a number of years,” said Knottek, the city’s director of transmission planning and compliance. “We’re putting our trust in the process and hopefully we’ll get some relief with the transmission-expansion process.”

Variable Demand Curve Approved

The MOPC endorsed the SPP Market Working Group’s (MWG) revision request to use a variable demand curve that moves SPP toward “a more robust valuation of regulation and operating reserve” and more accurately addresses and values operating and energy shortages during scarcity events.

Ross, the MWG’s chair, said RR 198 would mitigate stakeholder concerns related to FERC Order 825, which established settlement interval and shortage-pricing requirements for organized markets.

Golden Spread Electric Cooperative’s Mike Wise cast the lone opposing vote, once again expressing his concerns over SPP’s use of reliability unit commitment to avoid scarcity pricing situations. Shell Energy abstained. (See “RUC, Shortage Pricing Practices Challenged,” SPP Board of Directors/Members Committee Briefs.)

“It’s a step in the right direction, but it’s not far enough,” Wise said. “SPP operations is mitigating all of this anyway. The inappropriate use of RUCing is destroying shortage pricing and pricing around intervals, which isn’t allowing the correct market signals.”

Responding to Wise, Ross said the MWG had listened to Golden Spread’s concerns and those of others, and changed both the size and number of steps in the process. “It’s best we move forward at this point,” he said.

MOPC’s Consent Agenda Endorses 10 Revision Requests

SPP Stakeholders pulled a compliance-driven revision request from the consent agenda before unanimously passing the measure.

RR 195 simplifies the process of SPP’s “data specification” document required by NERC Reliability Standards IRO-010-2 and TOP-003-3 and makes basic formatting changes to the RTO’s operating criteria document.

SPP’s Casey Cathey requested the revision be approved in order to begin making the formatting changes. He said staff’s intention is to come back to the MOPC in April for final approval of the document.

The nine other revision requests on the MOPC’s consent agenda, which passed unanimously, included:

BPWG-RR122: Clarifies how the Tariff’s re-dispatch costs are determined and settled through the Integrated Marketplace, deletes obsolete language and clarifies long-term congestion rights for service subject to re-dispatch, and updates the business practices to reflect current practices.
ORWG-RR134: Clarifies previously ambiguous operating criteria language for the initial submission and subsequent updates of unit de-rate information in SPP’s control room software system.
BPWG-RR143: Retires a business practice that managed congestion through the re-dispatch of firm service, which became obsolete with the Integrated Marketplace.
MWG-RR190: Corrects SPP’s definition of residual transmission system capability by adding a missing variable in the protocols and clarifies that previous awards are considered in annual and monthly FTR allocations and auctions.
MWG-RR191: Clarifies that there should not be a requirement to reprice the day-ahead and/or real-time markets for every data input/software error.
MWG-RR192: Removes the Violation Relaxation Limits (VRL) report’s quarterly reporting requirement, which is covered in greater detail through other means, such as monthly reports to the Market Working Group, the Market Monitoring Unit’s annual State of the Market report and the Operations Annual VRL report.
BPWG-RR194: Aligns network integration transmission service practices with the new OASIS functionality as of March 1, as required by FERC.
RTWG-RR197: Completes the MMU’s annual review of frequently constrained areas by updating the list of constraints and resources.
MWG-RR199: Quarterly settlement clean-up clarifying how some of the calculations work and allowing market participants to better shadow the calculations.

The consent agenda also included several annual charter changes for some stakeholder groups. The committee pulled a request to make the Competitive Transmission Process Task Force — charged with improving SPP’s FERC Order 1000 processes — a standing task force. MOPC Chair Paul Malone, with the Nebraska Power Public District, said he believed task forces should have a time limit and be folded into a working group should there still be a need for their work.

After a brief discussion, Grant, the group’s chair, agreed to a two-year extension for the task force.

“Hopefully, once we’ve gone through one or two [Order 1000] processes, we’ll have a good process,” he said. “We’ve only had one [Order 1000] process, and until we have a couple more, don’t be surprised if we don’t ask to be extended for another couple of years.”

– Tom Kleckner

January 24, 2017

SPP MOPC Endorses 14 Tx Projects over Objections

By Tom Kleckner

DALLAS — SPP stakeholders last week endorsed $201.5 million in transmission projects as part of the RTO’s Integrated Transmission Planning process, despite objections from several entities.

The ITP’s final 2017 10-Year Assessment recommended 14 projects in the southern part of SPP’s footprint, clustered in the Texas-Oklahoma Panhandle and along its eastern seam. Staff said the projects have an annual production cost benefit of $59 million and will solve long-standing congestion issues in West Texas.

Bill Grant, director of strategic planning for Southwestern Public Service, pushed back against the Transmission and Economic Studies working groups’ recommendation to the Markets and Operations Policy Committee, saying a 90-mile, 345-kV line in SPS’s service territory is “the right project but the wrong time.”

The proposed $144 million project would run southwest of Amarillo to SPS’s Tolk Generating Station near Muleshoe. Tolk consists of two 350-MW coal-fired units that date back to the early 1980s. SPS is currently evaluating whether to keep the plant operating.

“We think it’s a good project, but it’s not a good economic project at this time,” Grant told RTO Insider. “We think it’s best as a long-term project. If we do shut the plant down, restudying the project makes sense.”

Grant said SPS will be making some “major resource decisions” over the next few years. He said one of his company’s customers will begin buying power from one of its own affiliates, an unnamed SPP member, leaving SPS in a “resource flux.” Grant said he expects the resource plan to “clarify the need for this line in time.”

Tolk was one of seven Texas coal plants targeted by EPA for affecting air quality in the Big Bend and Guadalupe Mountains national parks along the Mexican border. The agency in November withdrew a requirement that the plants reduce their emissions, but Tolk is still facing potential future water-supply shortages.

“The concern we have is the removal of [the] regional haze [rule] changes the outlook,” Grant said. “I’m not questioning the analysis, but I am questioning the timing of the recommendation, because there’s so much unknown at this time.”

The company sees a long-term need for a 345-kV line in that area but would “feel better” about a decision in the future, he said.

SPP staff said the project would ease congestion in the corridor but could also avoid potential costs of up to $120 million from incremental upgrades in future studies. Staff also said the Potter-Tolk line improves voltage stability limits in SPS’s south load pocket and would ease a generation interconnection queue filled with wind projects.

“There is a significant price difference between resources in the southern end and SPS resources in the north,” said Antoine Lucas, SPP’s director of transmission planning. “Cheaper energy is looking to flow south, but a lack of transmission is causing a constraint and driving costs up in the SPS zone.”

Grant cast one of seven opposing votes against the recommendation. Eight other members abstained.

“I’m just trying to caution [everyone],” Grant said. “I don’t want to go through another Walkemeyer, but that may be exactly where we’re headed.”

Grant was referring to SPP’s first competitive project under FERC Order 1000, which was awarded to the incumbent transmission owner but then pulled when changing load projections rendered the project moot. SPP staff will determine whether any of the 14 projects will be deemed competitive projects. (See SPP Cancels First Competitive Tx Project, Citing Falling Demand Projections.)

The Potter-Tolk line was one of two projects staff identified through an “alternative project analysis” to evaluate needs in support of SPP initiatives along the seams or solving congestion and operational problems.

That analysis also recommended a 345/161-kV transformer and 161-kV line upgrade in southwestern Missouri near Springfield. The line connects to an Associated Electric Cooperative Inc. substation in Morgan and could qualify as a seams project pending negotiations with AECI. (See “SPP-AECI Joint Study Recommends Two Projects,” SPP Seams Steering Committee Briefs.)

SPP staff also performed additional analysis to ensure that transmission model updates and the 2016 near-term projects were included in its recommendations.

The 2017 ITP10 considered three futures: regional and state approaches to carbon reductions as a result of the now-endangered Clean Power Plan, and a business-as-usual reference case.

Supplemental Analysis Incorporated into 2017 ITPNT

The MOPC unanimously endorsed the TWG’s supplemental analysis incorporating newly issued and withdrawn notices-to-construct (NTC) from the 2016 ITP Near-Term Assessment into the 2017 ITPNT. The additional analysis helped better inform the ITPNT decisions because the NTCs and withdrawals occurred after the 2017 ITP10 models had been completed.

Lucas said the supplemental analysis was done to help bridge the gap between the ITP’s new and old processes. A final near-term assessment will be conducted for 2018.

MOPC Chair Paul Malone asked Lucas whether SPP also analyzes the transmission systems of new members coming into the RTO.

“We look at the existing systems based on SPP criteria and ensure the necessary upgrades have been completed before they roll into the network,” Lucas said.

As part of its analysis, staff evaluated 420 detailed project proposals — down “significantly” from years past, Lucas said — and made 131 model corrections.

A draft 2017 ITPNT portfolio was issued Jan. 6. Transmission owners and interested competitive developers will have until Feb. 3 to provide study cost estimates to SPP. An updated project portfolio will be shared during a Feb. 23 planning summit, and a draft report and recommendations will be made for the April MOPC and Board of Directors meetings.

MOPC Approves Change to Renewables Modeling

The MOPC also endorsed a revision to the Transmission Process Improvement Task Force’s (TPITF) white paper that the committee approved last July. The TPITF has been charged with combining SPP’s various planning efforts into one annual cycle, set to begin in 2018.

In recommending a common planning model, the task force has first suggested modeling renewable facilities with firm service at their highest summer output over a three-year period, with off-peak and light load modeled at 100% of firm service.

The new language recommends those resources with firm service “be modeled in the summer peak base scenario model at each facility’s latest five-year average for the SPP coincident summer peak, not to exceed each facility’s firm service.” Non-firm service will be modeled at zero.

The measure passed with four abstentions.

Brian Gedrich, the group’s chair and executive director of development for NextEra Energy Transmission, said the change was necessary because SPP’s wind output has been approaching 100% firm transmission-service levels during summer peak conditions.

However, several MOPC members expressed their concern with their inability to use SPP’s financial hedging instruments to pay for congestion costs.

“We build to the specifics of firm transmission … but [financial transmission rights] are not happening. We have an obligation to manage that,” Grant said. “This proposal is a compromise — a good compromise — but our concern is not being financially hedged against projects where we’ve paid for an upgrade, and then [do] not get the hedge.”

“This impacts our customers,” said Oklahoma Gas & Electric’s Greg McAuley. “They’ve had to pay for firm service, and now they’re paying congestion charges and new transmission charges. As we’ve discussed here, we really don’t have a hedge. All this planning, yet customers are paying for all this congestion. We’re asking ourselves, how did we end up like this?”

“We’re on a journey. This is a first step,” Gedrich said. “We may find over time this five-year average is too generous, it’s too optimistic.”

Nearly $2B in Projects Completed, Approved in 2016

SPP staff reported that members completed 78 upgrades totaling $939 million in 2016, while NTCs were issued for another 138 projects worth an additional $992 million.

ITP projects accounted for $1.4 billion of the total: $582.3 million for 44 completed projects and $859.5 million in NTCs.

The projects are part of SPP’s Transmission Expansion Plan. The MOPC unanimously endorsed staff’s recommendation that the board accept the 2017 STEP report as documenting completion of the Tariff’s Attachment O transmission planning process.

January 24, 2017

ISO-NE Opens First Public Policy Process Under Order 1000

By William Opalka

WESTBOROUGH, Mass. — Stakeholders have until Feb. 25 to comment in ISO-NE’s first implementation of the public policy requirements of FERC Order 1000.

The RTO is seeking stakeholder comments on federal, state and local statutes and regulations that could require new transmission.

FERC order 1000 public policy ISO-NE — | *Avangrid*

It is the first of an eight-step process outlined to the Planning Advisory Committee on Wednesday that could result in a transmission study and a competitive procurement. Comments should be emailed to PublicPolicy@iso-ne.com.

The New England States Committee on Electricity (NESCOE) has until April 1 to identify federal and state policy requirements. The RTO also can identify such requirements, along with local (municipal and county) requirements. Stakeholders’ responses to NESCOE will be due 15 days afterward.

If transmission needs are identified as a result of the process, the RTO will provide a draft scope for a public policy transmission study.

Current rules call for ISO-NE to provide a draft scope for the study by June 1, although it is seeking a Tariff change to push the date back to Sept. 1.

If the RTO decides to seek a transmission upgrade, it will invite qualified transmission project sponsors to submit proposals. After evaluating the proposals and PAC input, the RTO will narrow the “stage one” proposals to finalists eligible to submit more detailed “stage two” proposals, one of which will be selected as the preferred solution.

ISO-NE will monitor milestones until the project is completed and in service.

EPA’s Clean Power Plan, which was expected to result in transmission to connect renewable generation with load, is in jeopardy under the Trump administration. But New England states are expected to continue their efforts to decarbonize through power purchase agreements and potentially tighter emission caps under the Regional Greenhouse Gas Initiative — initiatives that could require transmission investments. (See New England to Charge Ahead on Clean Energy Makeover in 2017.)

January 24, 2017

FERC Signals Bulk of NIPSCO Order Work Complete

By Amanda Durish Cook

FERC last week found that MISO and PJM have largely complied with commission directives issued in an order resolving a complaint by Northern Indiana Public Service Co. over interregional planning (EL13-88-001, et al.).

FERC NIPSCO Interregional Planning — Solomon | © *RTO Insider*

But the RTOs still face additional compliance filings to demonstrate better alignment of studies and cost allocation.

FERC last week accepted most of the joint operating agreement changes filed by the two RTOs and denied multiple requests for rehearing, including those from MISO and PJM themselves, as well as MISO transmission customers and NIPSCO.

The commission instead stuck to opinions issued last April. (See MISO, PJM Working to Comply with NIPSCO Order.)

At last week’s MISO-PJM Interregional Planning Stakeholder Advisory Committee meeting, transmission engineer Adam Solomon said the RTOs will conduct a legal review of the order and publicly post a summary and work plan next week.

Despite protests, FERC stood firm on its directive to scrap the previous triple benefit-to-cost ratio test, where projects had to meet a joint 1.25:1 ratio as well as the same calculation within each RTO.

The RTOs must now rely on a net value of the total benefits calculated for each RTO and are responsible for determining “whether the potential interregional economic transmission project meets its individual 1.25-to-1 benefit-to-cost threshold using each RTO’s share of the project’s total cost.”

Cost allocation is now based on each RTO’s pro rata share of the project’s total benefits. The commission rejected arguments by the RTOs and MISO transmission customers that an additional interregional benefit-to-cost analysis provides a “common” benefit metric to compare projects.

“Requiring MISO and PJM to each rely on their regional analysis to calculate both the benefits and costs of a potential interregional economic transmission project creates a more direct link between the costs allocated to each RTO and the benefits received,” FERC wrote.

FERC also found that a request by the RTOs to continue allocating costs of interregional transmission projects based on a joint economic benefit calculation still contained in the JOA would “create an untenable mismatch in the process for selecting an interregional economic transmission project and the process for allocating the costs of that project.”

MISO and PJM cannot “employ an additional interregional benefit-to-cost analysis that is calculated differently than either of their individual, regional benefit-to-cost analyses,” the commission said.

FERC upheld an earlier decision to replace MISO’s requirements that a qualifying project be at least 345 kV and meet a $5 million cost threshold with a 100-kV voltage minimum and no specified cost floor.

However, as pointed out by the Organization of MISO States, the commission realized it did not address MISO’s lack of Tariff language on cost allocation for sub-345 kV projects. Market efficiency projects in MISO are currently allocated 20% to all transmission customers and 80% to transmission customers in local resource zones. FERC gave the RTO 30 days to either include sub-345-kV interregional projects into the existing cost allocation or create a different allocation method.

MISO is already considering expanding its market efficiency voltage threshold to include sub-345-kV economic projects; cost allocation overhauls will be discussed throughout 2017. (See MISO Stakeholders Propose Changes to Market Efficiency Cost Allocation Process.)

No Joint Model

Solomon said the order invalidates the need to create a joint model because FERC has accepted MISO and PJM filings that removed any references to such a model.

FERC last April directed the RTOs to explore the possibility of a joint model that uses identical assumptions and criteria to align their respective regional processes. In December, MISO staff said a joint model using identical assumptions would be difficult to accomplish. (See “MISO Says Common Assumption Set with PJM a No-Go,” MISO Planning Subcommittee Briefs.)

MISO will instead use regional metrics to independently quantify benefits and split project costs.

“It’s pretty clear what we need to do going forward,” Solomon said.

Not Applicable to MISO-SPP Seam

MISO members hoping that the NIPSCO order would be applied to the SPP seam will have to wait for a fresh docket. FERC said its NIPSCO directives “are limited to issues pertaining to the MISO-PJM seam.” The commission rejected ITC Holdings’ request that MISO also relax SPP interregional cost and voltage thresholds — still at $5 million and 345 kV — saying ITC brought no evidence forward to support the rule extension.

FERC accepted new JOA language that describes interconnection coordination procedures already in place in the RTOs’ governing documents, language stipulating that each RTO will monitor the other’s transmission system for potential impacts and include concerns in the system impact studies of the interconnection process. The RTOs will also exchange data at least twice each year to study the impact of the other’s interconnection requests on its own transmission system.

Coordinated System Plan Needs Work

However, FERC found MISO and PJM only “partially” complied with the commission’s directive to revise the JOA to describe how the RTOs will incorporate their respective transmission expansion planning processes into future coordinated system plan studies.

The commission directed the RTOs to submit another compliance filing detailing how the plans would be integrated and create “binding deadlines” for an annual review of issues and when to decide on whether they should embark on the studies. MISO and PJM had proposed an information exchange in the fourth quarter of each year that would lead to a joint review of regional issues the following January, but they did not provide specific deadlines.

FERC denied NIPSCO’s request that market-to-market payments be added to the JOA benefit calculation. The commission said the addition would double-count a portion of the congestion — an issue still under scrutiny in a separate complaint. (See PJM, MISO Go Quiet on Pseudo-Ties; Reach Interface Pricing Accord.) FERC also said market-to-market payments do not reduce production costs but are transfer payments between RTOs “that make the RTO that redispatched its system whole for the increased production costs that it experiences to allow the other RTO to exceed its firm flow entitlements.”

FERC also denied a request by a group of MISO generators that the RTOs better identify constraints and flowgates, saying it was not an issue raised in the original NIPSCO complaint since the complaint “made only incidental references to flowgates.”

Retirement Coordination Approved

In a separate order issued last week, FERC unconditionally accepted the MISO-PJM generator retirement coordination plan (ER16-1969-002) with little comment. The plan adds generator retirement study information-sharing and mutual evaluation rules to the RTOs’ JOA. (See MISO Outlines Retirement Coordination with PJM.)

2017 MEP Identification Underway

Ling Hua, MISO’s interregional economic transmission planning adviser, said MISO and PJM have begun work to identify interregional market efficiency projects. Both RTOs have opened issues submission windows that allow members to submit solution proposals until the end of February. From March to September, the RTOs will evaluate project proposals for year-end approval by their respective boards.

The two RTOs have separately identified congested flowgates ripe for interregional efficiency projects, with MISO submitting 13 possible projects and PJM identifying four. The only potential project common to both lists is the Olive-Bosserman 138-kV project on the western Michigan-Indiana border in American Electric Power’s territory.

Solomon said he expects a learning curve this year in identifying interregional projects as RTO staff and stakeholders move to a new interregional process.

“We’ve kind of been stuck in between two interregional processes until yesterday,” Solomon said at the IPSAC meeting.

A day before the order issuance, at its Jan. 18 Planning Advisory Committee meeting, MISO reported that it considered all nine directives in the NIPSCO order completed as of Dec. 15.

January 24, 2017

FERC Orders Tx Refunds, Investigates Pipeline Rates in PJM

FERC last week ordered American Electric Power and FirstEnergy subsidiary Allegheny Power to refund more than $7 million to ratepayers for the canceled Potomac-Appalachian Transmission Highline (PATH) project (ER09-1256; ER12-2708).

The ruling upheld most of the $10 million in refunds recommended in an initial ruling by Administrative Law Judge Philip C. Baten, backing the judge’s decision to deny recovery of $6.2 million in advertising, lobbying and “advocacy-building” costs. But the commission reversed Baten on his rejection of some legal costs and losses on the sale of properties the companies acquired for the project. (See FERC ALJ Rejects $10 Million in PATH Transmission Project Recovery.)

The commission also found that PATH’s base return on equity should be reduced from 10.4% to 8.11% and disallowed recovery of $1.1 million in expenses booked into a wrong account.

The companies have 60 days to submit revised information, including an updated Form 1 that recalculates costs of service and estimated refunds.

Approved in PJM’s 2007 Regional Transmission Expansion Plan, the $2.1 billion project would have run from AEP’s John Amos coal generator in St. Albans, W.Va., to New Market in Frederick County, Md. PJM canceled the project in 2012 after determining it was not needed based on revised load forecasts.

The ruling was a victory for two PATH opponents from West Virginia who filed a pro se intervention challenging the companies’ recovery request for recovery of $121.5 million.

FERC Orders Investigation into Overcharging for Natural Gas Pipelines

The commission is investigating the rates charged by two natural gas pipelines, one of which delivers into the PJM footprint in Chicago (RP17-302 and RP17-303).

FERC believes Wyoming Interstate Co. and Natural Gas Pipeline Company of America, both Kinder Morgan subsidiaries, may have both been overcharging customers, based on reviews of their 2014 and 2015 FERC Form No. 2 annual reports.

FERC estimates Natural’s ROE for those calendar years to be 28.5% and 20.8%, respectively. Natural owns the Amarillo and Gulf Coast Lines, both of which terminate in the Chicago area.

The commission estimates WIC’s ROE for those calendar years to be 17.7% and 19%, respectively. WIC owns 850 miles of pipeline, including a mainline system between western Wyoming and northeast Colorado.

FERC says it’s concerned that both Natural’s and WIC’s level of earnings may exceed their actual cost of service, including a reasonable ROE. The commission ordered the companies to file full cost and revenue studies within 75 days.

ODEC Tariff Revisions Approved Subject to Compliance Filing

FERC last week approved a revised cost-of-service rate schedule that changes how Old Dominion Electric Cooperative collects demand costs from its 11 distribution cooperatives in Virginia, Delaware and Maryland.

The new formula replaces one that has been in place since 1992 that recovered demand costs based on each cooperative’s coincident peak (CP) usage. The new formula includes rates that ODEC said more accurately reflect market conditions and its costs under PJM’s methodology.

The commission affirmed the initial decision by ALJ H. Peter Young that found several portions of ODEC’s filing, including its four-year average “proxy rate” for PJM capacity costs and the 12 CP true-up mechanism for PJM capacity costs and third-party transmission costs, unjust and unreasonable.

It reversed the judge’s finding that ODEC’s proposed zonal averaging mechanism and the use of add-backs in 2014 were unjust and unreasonable.

The revisions were backdated to Jan. 1, 2014, and ODEC is required to make refunds and file a refund report (ER13-2483).

FERC Approves FE Companies’ Filings on Affiliate PPA Waiver

The commission last week approved tariff revisions filed by FirstEnergy Solutions and several affiliates to comply with a FERC order ruling that a power purchase agreement in which the company’s regulated utilities would buy energy from the company’s merchant generators would be subject to its affiliate abuse review (ER16-1807, et al.). FirstEnergy asked the Public Utilities Commission of Ohio to withdraw the PPA following the FERC ruling. (See FirstEnergy Foes Ask FERC to Step in Again in Ohio Dispute.)

– Rory D. Sweeney

January 24, 2017

LED Kills the Edison Star

In 1879, Thomas Edison patented the incandescent light bulb. For more than a century, the incandescent bulb and its upscale offspring, the halogen bulb, have reigned supreme.

The reign is ending. Light-emitting diode (LED) lighting is replacing Edison lighting.

Here’s a question: How much more impact is rooftop solar having on retail electric sales than LED lighting?

It’s a trick question. Rooftop solar has had less impact on retail electric sales. LED lighting already has reduced annual retail electric sales by 30 billion kWh. Rooftop solar has reduced annual retail electric sales by 14 billion kWh.

But it’s the future that’s really interesting. The U.S. Energy Information Administration’s latest study forecasts LED lighting over the next 20 years to reduce annual retail electric sales by 300 billion kWh under a “current path” and by 435 billion kWh under a more aggressive path.[1] Rooftop solar over the next 20 years is expected to reach 100 billion kWh annually.

Let’s think about that. For all the attention given rooftop solar as environmental boon, new age investment and regulatory flashpoint, the LED bulb is three times more significant.

And three times more significant for electric utilities. Lighting represents 15% of retail electric sales. Over the next 20 years, half of those lighting sales will disappear, perhaps three quarters under a more aggressive path. Those electric vehicles better show up soon.

And what if Haitz’s Law — the LED parallel to Moore’s Law — continues, such that the cost per lumen keeps falling by a factor of 10 every 10 years? The LED is just another form of semiconductor. The substitution could be even more rapid.

Even at today’s cost per lumen, Edison lighting is much more expensive on a life-cycle basis than LED lighting. Much, much more expensive.

A General Electric soft white 60-W Edison bulb can be had in quantity purchase for $1.30, and rated to last for 1.4 years based on an average use of three hours per day. A GE soft white 60-W equivalent LED bulb can be had in quantity purchase for $3, use 10 W and last for 13 years based on the same average. So over 13 years, Edison lighting would cost an extra $9 for the bulbs and an extra $78 for the electricity (at 11 cents/kWh).[2]

Bottom line: Rooftop solar may be all the rage, but just changing light bulbs makes a bigger dent in emissions from combusting fossil fuels. And saves money to boot. Doing good and doing well.

Watt’s in your socket?

Steve Huntoon is a former president of the Energy Bar Association, with more than 30 years of experience advising and representing energy companies and institutions. He received a B.A. in economics and a J.D. from the University of Virginia. He is the principal of Energy Counsel LLP.

[1] You won’t find these forecasts in EIA’s “Annual Energy Outlook 2016,” which forecasts a lighting consumption decline of only 28% from 2015 to 2040 (Figure IF3-3). Instead the forecasts are derived from EIA’s specialty study “Energy Savings Forecast of Solid-State Lighting in General Illumination Applications” (September 2016) and require interpolating from Tables 4.2 and Figure 4.2, and converting from British thermal units to kilowatt-hours and from source to sink.

[2] Edison lighting also costs more for the incremental air conditioning in the summer to combat the heat from the bulb. (Generally, this extra cost is more than the incremental heating savings in the winter.)

January 24, 2017

MISO Planning Advisory Committee Briefs

CARMEL, Ind. — MISO will conduct three new separate, but related, studies this year that could identify a transmission solution for the RTO’s constrained interface between its North and South regions.

design requirements task team miso planning advisory committee — Ghodsian | © *RTO Insider*

The efforts include a market congestion planning study, which is part of MISO’s 2017 Transmission Expansion Plan (MTEP 17), as well as a footprint diversity study and regional transmission overlay study.

Any of the reports could produce a replacement for, or supplement to, the seven-year transmission use settlement between MISO and SPP that limits flows between MISO North and South.

While the trio of studies share modeling and assumptions, each has a different scope, Arash Ghodsian, MISO manager of economic studies, said at a Jan. 18 Planning Advisory Committee meeting. He added that he didn’t know which study might produce a feasible project.

MISO’s Eric Thoms said the congestion and footprint studies would identify project candidates in the third quarter. However, the lengthier regional transmission overlay study, which is expected to determine long-term transmission needs at the end of this year, will not identify prospective projects until the study is concluded in 2019.

The footprint study is the only effort specifically designed to “identify potential mitigation plans to increase the interface capability” between MISO North and South, Ghodsian said. That study will be completed at the end of this year in concert with the MTEP 17 market congestion planning study, which will focus on MISO South.

Project candidates emerging from the congestion planning study will be selected at the September PAC meeting, Ghodsian said. “If we have a good enough solution for transmission needs, we’ll stand by it,” regardless of what study produces it, he said.

None of the studies would result in a revised settlement with another RTO, he noted.

MTEP 19 Will Probe Demand Response, Efficiency Programs

MISO is already putting together pieces for MTEP 19 in the form of a demand response and energy efficiency study.

The RTO said the third-party study is a “refresh” of a similar 2014-15 report and will provide a 20-year forecast for DR, energy efficiency and distributed generation and “their associated costs to install in MISO and the Eastern Interconnection.” Work on the study should run through December, and the RTO said it will conduct quarterly stakeholder workshops related to the subject, with the first scheduled for Feb. 24.

Applied Energy Group, the consulting firm responsible for the 2014-15 study, has been retained to perform the analysis.

Rao Konidena, MISO adviser of energy efficiency, said the RTO recognizes that energy efficiency and DR programs are administered by states and will respect state jurisdiction by simply collecting data on savings from programs while refraining from analyzing any specific program.

MISO has admitted that there is a “gap” the DR and energy efficiency data it requires of load-serving entities and what gets reported, leading to a modeling disadvantage.

MISO to Strike TSR Redispatch Option from Tariff

MISO will file with FERC to remove transmission service request (TSR) redispatch study options from its Tariff, citing market-based dispatch as the more efficient option.

A TSR reserves transmission capacity in the market and the redispatch option is added if a transmission customer has also purchased redispatch service. The transmission provider attempts to relieve system constraints by redispatching its resources, and the option requires MISO to identify which nearby generators — even ones external to MISO — can be redispatched to mitigate transmission constraints.

According to MISO’s Tariff, a TSR with a redispatch option is not eligible for financial transmission rights or auction revenue rights, unlike regular TSRs, making the option unappealing.

Paul Muncy, of MISO’s transmission access planning division, said market-based dispatch would take the place of TSR redispatches. Although TSR dispatches are still offered, MISO currently has no confirmed TSRs that use a redispatch option, and the study option should have been eliminated long ago, he added.

According to MISO, the current TSR redispatch option is burdensome, requiring customers to sign a contractual financial agreement with generation owners in order to use a subset of units and agree on an operating procedures guide between generation owners, impacted transmission operators and MISO.

The RTO said that when it dispatches around congestion, implementing the TSR-related operating guides “would take away from normal market-driven dispatch implementation and reduce market transparency, adding burden to [the] market system and settlement system.”

“It’s not only cumbersome, but it detracts from market efficiency,” Muncy said.

Some stakeholders have wondered if there is any harm in just retaining the language in the Tariff, but MISO compliance staff responded that keeping dead language in the Tariff is not a zero-cost option because the RTO must work to update the procedures in place behind the language.

Improvements Sought for Competitive Transmission Process

MISO will convene a Competitive Transmission Task Team to improve its competitive transmission selection process, aiming to complete a FERC filing on the matter sometime after October.

Brian Pedersen, MISO senior manager of competitive transmission administration, asked for stakeholder feedback on every aspect of the competitive process — from qualification to MISO’s communication — to begin the effort.

“We want to pop our heads up and ask how well we’ve done,” he said.

Stakeholders should also think about how to streamline the process in cases where MISO is dealing with multiple competitive transmission projects at the same time, Pedersen said.

“This is definitely a substantial undertaking,” he said. “We need to think about how to stagger that, scale it.”

MISO also reflected on the breadth of proposed projects stemming from its first request for proposals. The RTO said the process resulted in a “variety of innovative and novel cost caps, concessions and commitments … taking advantage of the freedom to develop new ways to compete on cost” and the annual transmission revenue requirement within the developer selection process.

Pedersen said an “extraordinary amount” of resources and innovation went into project proposals.

“It definitely was an instruction in innovative thinking and competitive spirit,” Pedersen said.

The RTO is moving ahead on voluntary meetings with developers that were not chosen.

MISO has also opened its 2017 prequalification window for organizations seeking to become a qualified transmission developer. Interested parties must be a MISO member and submit a transmission developer application — along with a $20,000 application fee — before Feb. 6.

In December, LS Power subsidiary Republic Transmission was awarded the Duff-Coleman 345-kV transmission project, the RTO’s first competitive project under FERC Order 1000. The company will construct two substations and a 28.5-mile line in Southern Indiana and Western Kentucky. Republic will deliver quarterly updates to MISO throughout 2017 on the progress of the $49.8 million project. (See LS Power Unit Wins MISO’s First Competitive Project.)

Minimum Design Requirements Task Team Retired

MISO has retired the Minimum Design Requirements Task Team upon conclusion of the group’s work, PAC Chair Cynthia Crane said.

A first version of Business Practices Manual 029, which governs minimum design requirements for competitive projects, was implemented last January. A second version of the manual, detailing a set of ratings that transmission projects will be required to meet, is slated to be released this spring.

Crane said future improvements to BPM 029 will be funneled through the upcoming Competitive Transmission Task Team.

— Amanda Durish Cook

January 24, 2017

SPP’s Z2 Task Force Sees More Work in its Future

By Tom Kleckner

DALLAS — SPP stakeholders last week spent the remains of a meeting cut short by weather-related travel problems discussing staff and member solutions to the RTO’s Z2 crediting process.

SPP z2 task force — McAuley | © *RTO Insider*

In the end, the Z2 Task Force came no closer to a solution to the albatross and decided to schedule monthly meetings in an effort to reach an April deadline for recommending improvements.

The task force was established last August and had hoped to present its findings to the Board of Directors and Markets and Operations Policy Committee in January or April of this year.

“We knew six months was aggressive,” said Bruce Rew, SPP’s vice president of operations and the group’s staff secretary.

Stakeholders drilled down into two of the six options first presented by SPP staff in November: “reverse engineering” of the Z2 process and using incremental long-term congestion rights (ILTCRs). (See Z2 Task Force Looks at Incremental Congestion Rights.)

The task force also reviewed a proposal from Westar Energy that suggested modifying SPP’s generator interconnection process and transmission service requests and incorporating financial hedging instruments. Westar also proposed revising the Tariff so that any proposed sponsored projects would be studied for inclusion in the planning process and possible selection for Tariff funding.

That suggestion did not seem to gain much traction with stakeholders.

Grant pointed out that Westar’s plan would result in a separate process to secure annual revenue rights or transmission congestion rights. “I want to get back to being simple and not doing anything more than we need to do, because that’s what got us into trouble,” he said.

Under the SPP Tariff’s Attachment Z2, staff is responsible for assigning members financial credits and obligations for sponsored upgrades. However, staff had not applied the credits for years dating back to 2008, complicating the task of trying to accurately compensate project sponsors and claw back money from members who owed debts for the upgrades.

Kansas City Power & Light’s Denise Buffington, who chairs the task force, noted that each discussion on Z2 unearths new information previously unknown to the group.

“We’re still trying to figure out what the universe looks like, and how to rate it,” she said last week.

Staff’s reverse-engineering proposal would remove short-term TCRs (less than one year) from the crediting process, although short-term revenues have declined substantially since the start of SPP’s Integrated Marketplace. A second proposal over the long term would implement a standard credit payment rate for all creditable impacts, including both network and point-to-point reservations, should the Z2 process be terminated.

SPP also suggested using its current ILTCR process as a cost-recovery mechanism for upgrades with directly assigned upgrade costs (DAUC). To be eligible for the ILTCRs and megawatt capacities, upgrades would have to be sponsored with DAUC, create additional available transfer capability on a specific path and be the outcome of a study request.

“With Z2 credits, there’s no question whether or not they’re given,” said NextEra Energy Resources’ Aundrea Williams. “With ILTCRs, there’s no certainty they’ll be awarded. Z2 is the byproduct of a formula. There’s still a possibility of not getting them as part of the auction. You would have to look at the overall pool of who gets what and what’s eligible for a” generator interconnection.

Oklahoma Gas and Electric’s Greg McAuley suggested another option: not completely disregarding the “do-nothing option.”

“I don’t like Z2 either, but if there’s enough confusion with these [proposals], I still think there’s a problem,” he said. “It’s like the devil you know. We know this devil, and until we’re sure that we have a viable option that isn’t just as complex, or more so, we shouldn’t dismiss the do-nothing option out of hand.”

January 24, 2017

FERC Won’t Act on Montana Regulators in PURPA Dispute

By Amanda Durish Cook

FERC last week rejected Vote Solar’s request that the commission reconsider its decision not to enforce the Public Utility Regulatory Policies Act against Montana regulators (EL16-117-001).

Vote Solar petitioned FERC in early December after the dismissal of its first complaint, which alleged that the Montana Public Service Commission violated the federal law when it allowed NorthWestern Energy to suspend its tariff for solar qualifying facilities pending an updated rate review. (See FERC Rejects Complaint on Montana Solar; 2nd Case Pending.)

ferc purpa montana — FLS Solar’s Fairmont Solar Farm in Fairmont, NC | *FLS Solar*

The Montana PSC issued the suspension last June after the utility argued that QF rates for solar producers were 35% above avoided costs and that the 130 MW of planned solar projects in the utility’s service area would place an undue burden on ratepayers.

The solar advocacy nonprofit said that NorthWestern was seeking to “undermine” PURPA and renewable generation.

The commission reiterated that it cannot direct the Montana PSC to take any action because state regulators are not FERC-jurisdictional public utilities subject to the Federal Power Act. The commission also said Vote Solar did not have standing to petition for enforcement because it was neither an electric utility nor a QF.

The commission rejected Vote Solar’s contentions that FERC has the authority to issue a declaratory order against the Montana PSC through the Administrative Procedure Act and that the commission can bring an enforcement action pursuant to Section 210 of PURPA based on the nonprofit’s complaint.

By granting Vote Solar’s request, the commission said it would be acting ultra vires — beyond its authority.

Furthermore, the commission maintained that its choice not to act against the PSC is backed by the Supreme Court, which “has established the general rule that an agency’s decision not to exercise its enforcement authority, or to exercise it in a particular way, is committed to its absolute discretion” under circumstances when their enforcement is not legally mandated.

“Because there is no legal requirement here to commence an enforcement action, there is thus no decision subject to legal error,” the commission said. “Although Rule 206 of our Rules of Practice and Procedure permits ‘any person’ to file a complaint with the commission, our regulations cannot grant us more authority than the statute grants us.”

Vote Solar said that FERC’s original dismissal created a “framework wherein the commission can only take action against a state regulatory authority when asked to do so by a regulated party … [and] leaves the public without a path to seek relief from the commission when state regulatory authorities fail to implement PURPA properly and places the burden on electric utilities, qualifying cogenerators and qualifying small power producers as the only entities that can seek enforcement action.”

The commission countered that Vote Solar is already an intervenor in a similar, separate complaint against the Montana PSC by North Carolina-based solar developer FLS Energy (EL17-5).

“Our dismissal of Vote Solar’s complaint here did not foreclose Vote Solar’s public participation in our proceedings,” FERC said.

January 24, 2017

Ex Rep Sees Smaller Federal Role in Energy Industry Under Trump

By Tom Kleckner

DALLAS — SPP’s Mike Ross told the Strategic Planning Committee last week the industry can expect a future with less federal intervention under President Trump’s administration.

federal energy industry trump — Ross | © *RTO Insider*

Ross, SPP’s senior vice president of government affairs and public relations, and a former six-term Democratic congressman from Arkansas, said he expects Trump to quickly issue an executive order withdrawing from the Paris Agreement on climate change.

“I believe the Clean Power Plan will be rolled back through whatever kind of legal thing they need, from executive order to rescinding the rule to simply not funding the [EPA]. Overall, I think you’ll see less regulation,” Ross said. “Everything in our industry will be regulated a lot less and pushed back to the states.”

Ross said he expects Trump’s opposition to the CPP to result in the delay of some coal plant retirements but not in new generator construction. “Quite frankly, I don’t think many companies are going to be spending millions of dollars to build a new power plant based on who the new president is,” he said.

He said he expects Congress to pursue legislation on cybersecurity and to review the Federal Power Act and RTO capacity markets. He also said there is some talk of FERC revisiting Order 1000.

Bloomberg reported last week that Trump will tap Commissioner Cheryl LaFleur as chairman of the commission, replacing Norman Bay.

FERC currently has three Democrats and two vacancies, but it will shift to a 3-2 Republican majority under Trump, so LaFleur’s appointment could be temporary.

Although Ross didn’t name names, he said potential appointees include those “who knew SPP very well and have been involved with SPP.”

Commissioner Colette Honorable’s term expires June 30, but Ross said there’s a chance she might be re-nominated. (See CPP, FERC’s Bay, Honorable Among Losers in Trump Win.)

“She’s pro-coal,” he said of Honorable, who previously chaired Arkansas’ Public Service Commission. “The last coal plant in America [AEP subsidiary Southwestern Electric Power Co.’s John W. Turk Jr.] was built in Arkansas, and she voted for it.”