Page 1358 – RTO Insider

January 26, 2017

CAISO Kicks off Effort to Procure Black Start Resources

By Robert Mullin

A new, “expedited” CAISO initiative seeks to establish a process for selecting and procuring black start resources, needed to restore segments of California’s transmission system in the event of regional outages.

The effort will follow an ambitious timeline: The ISO hopes to present a plan to its Board of Governors for approval in May.

The initiative represents the second phase of a 2013 undertaking to address NERC reliability standard EOP-005-2, which required transmission operators to draw up plans for system restoration in the event of widespread blackouts.

The ISO decided to explore the procurement issue after identifying a need for additional black start resources in the transmission-constrained San Francisco Bay Area.

CAISO’s black start procurement initiative was prompted by the need to better prepare the transmission-constrained San Francisco area for system restoration. | *SF Travel*

“This need is the impetus for this stakeholder initiative,” Scott Vaughan, CAISO lead grid assets engineer, said during a Jan. 24 call to kick off the effort.

CAISO staff have determined that, unlike in Southern California, where black start resources are more evenly distributed near major load centers and can provide more rapid restoration, resources serving the Bay Area are relatively far from population centers.

Under current practice, ISO and transmission owner restoration plans rely on black start resources either owned by a utility or acquired through a long-term contract. For a TO plan, a utility is able to recover the costs for resources through retail rates. Generation providing black start capability under the ISO’s plans are subject to a three-party agreement among the ISO, the applicable TO and the generator for a zero-price term.

Still, CAISO’s Tariff allows it to enter into black start service contracts for payment. If specific costs are not outlined in a contract, then the resource will be paid as exceptional — or out-of-market — dispatch and is entitled to bid cost recovery. The Tariff also outlines that scheduling coordinators can be required to pay for the service.

The new initiative would likely modify the current approach to procuring black start capability by ensuring that costs are spread beyond just the transmission-owning utility.

“Any such procurement would benefit all transmission customers in the area, yet may not result in the allocation of costs to all transmission customers if procured by the investor-owned utility,” said an ISO issue paper, released Jan. 17, in reference to the Bay Area’s specific need. “For instance, non-bundled customers taking service from a community choice aggregator, electric service provider or municipal utility in the area that rely on the black start capability may not face any cost allocation.”

CAISO has floated two ideas for cost allocation. The first would have the ISO enter black start contracts and charge all scheduling coordinators, rather than specific TO areas, for incremental black start capability. The other idea would entail it shifting cost allocation to local transmission access charge areas and recovering the costs from TOs as reliability service costs.

The Bay Area, however, poses unique challenges for black start procurement. One is the lack of eligible resources there.

“The ISO has said that there is a relatively small set of units from which this service could be procured,” said Brian Theaker, director of market affairs at NRG Energy. “Will the ISO disclose what that subset of units is?”

CAISO staff were reluctant to wade into that aspect of the issue before laying out a framework for procurement.

“At this point, we were not planning on getting into any more of the details around the specific requirement in the area or how we would go about procuring,” said Neil Millar, CAISO executive director of infrastructure development. “The goal right now is to land on the cost allocation process and the procurement process itself that would set out how we would go about doing this.”

Robert Jenkins of Flynn Resource Consultants picked up on Theaker’s theme.

“I was looking for what kind of characteristics is the ISO valuing in identifying this small number of units,” Jenkins said. “Is it geography? Is it size? Is it connectivity” to the ISO’s system? He added that he would be interested in learning more about the scope of the market when that information became available.

Millar responded by offering some qualifications, pointing out that CAISO wanted stakeholders to consider the procurement issue within the context of the relatively small number of resources eligible to participate in the market.

“It’s not a case of any generator located anywhere in the system,” Millar said. “Location does matter very much and there’s a relatively small subset, so that could affect people’s input on how we should go about planning this procurement process to pick a couple of units out of a relatively small subset.”

Bonnie Blair, a consultant representing the “Six Cities” utilities of Anaheim, Azusa, Banning, Colton, Pasadena and Riverside, pressed the ISO on the importance of the location of the resources.

Millar explained the “piecemeal” approach of restoring a part of the system after a blackout. The ISO starts by first bringing up a black start resource, then energizing individual transmission lines and “picking up other generators, a bit of load, more generators, then more load” to reach into the affected areas.

“So as you keep considering sources further and further away, you quickly get to where the time it would take to do all those steps wipes out the benefit of getting the resource in the first place,” Millar said.

Paul Nelson, electricity market design manager at Southern California Edison, wanted more specifics on the timeframe for acquiring the resources.

“Is this something that needs to be done in 2017, 2018?” Nelson asked. “Because that impacts the approaches for procuring it.”

“We’d like to have some sort of contractual arrangement by the beginning of 2018 or end of 2017,” Vaughan replied, adding that the small set of potential resources are not identified as black start capable and would likely require upgrades.

Theaker questioned whether the ISO schedule for completing the initiative was realistic, given the need to deal with issues of “compensation, context, structure and cost allocation,” as well as to draw up a straw proposal.

“It’s highly aggressive, but I think it is realistic,” Vaughan responded.

“Then I’d encourage you to identify some near-term milestones in terms of what has to be in place [and] when, in order to get this ready — not only for the board meeting in May, but also lay out the milestones for getting [resources procured by January 2018], as we’ve just discussed,” Theaker said.

Comments on the issue paper must be submitted to CAISO by Jan. 31. The ISO will publish a straw proposal Feb. 14.

January 26, 2017

Bay Resigns after Trump Taps LaFleur as Acting FERC Chair

By Rich Heidorn Jr. and Ted Caddell

WASHINGTON — President Trump on Thursday appointed Commissioner Cheryl LaFleur as acting FERC chair, replacing Norman Bay.

Hours after the announcement, Bay said he would resign his post Feb. 3, 16 months before the end of his term.

Bay’s departure, announced in a six-page letter reciting the agency’s recent accomplishments, will leave the commission with only LaFleur and fellow Democrat Colette Honorable — one member short of the three-person quorum required to issue other than routine orders. (See related story, Backlog, Delays Feared as FERC Loses Quorum.)

That will add urgency to the need to fill the three vacant Republican seats on the five-member panel. It could allow the reappointment of Honorable, whose term expires June 30 and was otherwise expected to be replaced by a Republican.

Calling his service on the commission “the greatest honor and privilege of my professional life,” Bay praised his fellow commissioners and the “dedicated and talented career staff” with whom he had worked.

“The last few years have brought dramatic change to the energy space. The shale revolution and an abundance of low-priced natural gas, technological innovation, the expanded use of renewable energy, increased energy efficiency and flat load growth, state and federal public policy, and consumer choice have been drivers for change,” Bay said. “As chairman, I have sought to help consumers realize the benefits from this change, while assisting the wholesale markets and industry in adapting to the change and maintaining just and reasonable rates and reliability.”

LaFleur’s Focus

LaFleur said she will remain focused on the same priorities as before: system reliability, grid security, transmission, energy supply diversity “and trying to adapt competitive markets to some of the state initiatives that we’ve seen.”

“While I recognize that FERC is in a state of transition as we await nominations to fill vacant seats at the agency, it is important that FERC’s work on the nation’s energy markets and infrastructure move forward,” she said in a statement. “I would particularly like to thank Chairman Norman Bay for his leadership of the commission over the past two years, and I look forward to working with him, Commissioner Colette Honorable, the terrific staff throughout the agency and future colleagues at FERC to continue to address the important energy issues facing our nation.”

Honorable issued a statement Monday praising Bay for his “grace and humility.”

“His leadership was critical for our continued work on gas and electric coordination, competitive transmission development, price formation and energy storage,” she said. “The utility sector is in the midst of profound change, and former Chairman Bay made certain that the commission kept pace and did not leave consumers behind.”

Republican Distrust

LaFleur’s appointment as acting chair suggests Bay never overcame the distrust of Republican congressional leaders, who had sought to keep LaFleur in the top spot she had ascended to after Jon Wellinghoff’s departure in November 2013.

President Barack Obama nominated Bay as chairman in a move engineered by then-Senate Majority Leader Harry Reid (D-Nev.), who publicly said he did not want LaFleur as chairman.

Bay was confirmed on a 52-45 party-line vote in July 2014, following a deal with the White House that delayed his move to the chairmanship for nine months. LaFleur was confirmed to a second term at the same time by a 90-7 vote.

Cheryl LaFleur and Norman Bay being sworn in at their Senate confirmation hearing in May 2014.

The deal was a concession to those who questioned why Bay — who had served as director of FERC’s Office of Enforcement since 2009 but had never served as a state utility regulator — would be appointed directly to the chairmanship over LaFleur, a former utility executive who has served on the commission since 2010. The last five chairmen before then had served a median of 30 months before becoming chair.

Bay also came under fire for what some energy lawyers and legislators called his heavy-handed running of the commission’s enforcement division.

Bay’s appointment to the chairmanship was strongly opposed by Sen. Lisa Murkowski (R-Alaska), ranking member at the time, now chairman of the Senate Energy and Natural Resources Committee. Sen. Mitch McConnell (R-Ky.), now Senate majority leader, said he feared Bay would be a “rubber stamp for the [Obama] administration’s anti-coal agenda.” (See At FERC, Uncertainty Remains Despite Norman Bay’s Nod.)

Republican Majority Coming

LaFleur acknowledged that her return to the center seat at the commissioners’ table is likely temporary. In a podcast posted Monday, she said that her appointment and Bay’s resignation made for “a pretty strange week.”

“I’d already decided to serve out my term,” she said. “I’ve been part of the Democratic majority ever since I’ve been here, and I knew that going forward I would be part of a Democratic minority, and if I was going to be here, and asked to lead, I thought I should.”

Although the commission has not traditionally been marked by partisan divisions, the president gets to appoint members of his party to three of the five seats and to pick the chairman. Since Republicans Philip Moeller and Tony Clark left, the five-member panel has been all Democrats.

Bay’s term would have expired in June 2018. LaFleur’s term expires in June 2019. (See CPP, FERC’s Bay, Honorable Among Losers in Trump Win.)

Carolyn Elefant, a former FERC attorney advisor and partner at a D.C. law firm specializing in energy regulatory issues, wondered why the Trump administration didn’t have a Republican ready to fill the slot immediately. “I cannot recall a time in my 27 years of FERC practice that the commission has been down to two members,” she said.

“I know that Sen. Murkowski has posted a statement on the Senate Energy Committee website about the importance of filling the seats promptly, but I don’t know how much pull she has with the administration,” Elefant said.

“The fact that Commissioner LaFleur — a Democratic appointee — was elevated to the chairmanship suggests to me that the administration hasn’t given much thought to FERC appointments; if it had, I would have expected a Republican nominee for chairman right out of the gate.”

Differences over Enforcement

LaFleur and Bay have always been cordial publicly, regardless of which one of them held the gavel. But they have had differences on policy.

When Bay was enforcement chief, FERC won more than $670 million in fines and disgorged profits from Morgan Stanley, Constellation Energy, Deutsche Bank and JPMorgan Chase.

Although LaFleur supported all of the settlements Bay brought to the commission, the two have not always seen eye-to-eye. In response to questions from the Senate, LaFleur detailed seven cases in which she issued separate concurrences or dissented from the majority on matters such as the way the commission applied its penalty guidelines or when it would share deposition transcripts with investigation targets.

Subjects in four of the cases LaFleur cited were represented by former FERC General Counsel William Scherman, who coauthored an Energy Law Journal article in May 2014 accusing Bay’s unit of ignoring subjects’ due process rights. Scherman and some other members of the energy bar had been criticizing Bay’s enforcement tactics privately and in industry forums for months.

The criticism became louder when the principals of Powhatan Energy Fund, which had been under investigation by Bay’s unit for three years without being charged, released documents they say prove they had been unfairly hounded.

On Bay’s last day as enforcement chief in August 2014 — before his swearing in to the commission — FERC issued a “notice of alleged violations” against Powhatan and its principals accusing them of market manipulation for making riskless back-to-back up-to-congestion trades to profit on line-loss rebates. In May 2015, the commission ordered Powhatan and its leaders to pay $34.5 million in penalties and disgorged profits in the case (IN15-3). The company is fighting the case in U.S. District Court for the Eastern District of Virginia.

Policy Changes?

Elefant said that once the Trump administration installs its three new members, FERC is likely to act swiftly to undo many of Bay’s enforcement initiatives. “I think that many of his aggressive enforcement policies will be dismantled — if not immediately, then once other commissioners are appointed,” she said.

But attorney Ken Irvin, co-leader of Sidley Austin’s global energy practice, said he doesn’t see anti-manipulation enforcement being significantly curtailed. “They’ve made a robust effort and collected a lot of monetary penalties,” he said in a statement. “I don’t expect to see any let-up.”

January 26, 2017

90-MW Wind Farm OK’d off Long Island

By William Opalka

The Long Island Power Authority on Wednesday approved a contract for a 90-MW offshore wind farm, by far the largest such facility contemplated in the U.S.

The site, 30 miles off the island’s Southern Fork, is the first part of a wind development in federally leased waters that could support up to 1,000 MW of offshore wind.

Gov. Andrew Cuomo two weeks ago proposed the state develop 2,400 MW of offshore wind in various sites off Long Island to support the goal of 50% renewable energy by 2030. He also prompted the LIPA Board of Trustees to act on contract negotiations that had stalled since the summer. (See Cuomo Proposes 2,400 MW of Offshore Wind by 2030.)

The wind farm could provide enough electricity to power 50,000 homes. If the Cuomo proposal is realized, as many as 1.25 million homes could be powered.

The wind farm developer, Deepwater Wind, built the nation’s first offshore wind farm off Block Island in Rhode Island, which was commissioned last month.

The LIPA board approved a contract submitted by Deepwater Wind for the South Fork Wind Farm after a yearlong process. Offshore wind was the lowest-cost option in the request for proposals from LIPA, beating out natural gas generation.

Neither LIPA nor Deepwater released contract terms on Wednesday.

The 20-year power purchase agreement includes a pay-for-performance clause, which allows LIPA to only pay for delivered energy, eliminating operating and construction risk, the authority said. LIPA said technology improvements reduced the project’s “all-in” energy costs to be competitive with other renewable energy sources.

“Depending on the schedule for permitting, construction could start as early as 2019, and the wind farm could be operational as early as 2022,” Deepwater spokeswoman Meaghan Wims told RTO Insider.

LIPA CEO Tom Falcone said in a statement, “We are confident this is the first step to developing the tremendous potential of offshore wind off Long Island’s coast and meeting Gov. Cuomo’s Clean Energy Standard. This project is the right size, at the right location and demonstrates how smart energy decisions can reduce cost while providing renewable energy and clean air for all of Long Island.”

Elizabeth Gordon, director of the New York Offshore Wind Alliance, said, “LIPA’s 90-MW South Fork project moves New York to the forefront of offshore wind development in America. Major progress on what will be the nation’s largest offshore wind project, combined with Gov. Cuomo’s 2,400-MW commitment, makes it clear that New York is entering a new energy era — one where offshore wind power is poised to play a key role in meeting downstate’s electricity needs.”

January 25, 2017

FERC OKs NYISO Demand Curve Reset

By Rich Heidorn Jr.

FERC last week approved NYISO’s revised demand curves but said the ISO must eliminate the assumption that new peaking plants in the New York Control Area (NYCA) will require emissions controls (ER17-386).

The Jan. 17 order approved NYISO’s Nov. 18 proposal on all but one of nine contested issues. The new demand curves will take effect with the ISO’s capacity auction for the 2017/18 capability year beginning May 1 and will be the basis for auctions through the 2020/21 delivery year. (See IPPNY: Demand Curve Reset ‘Top Priority’.)

The ISO will continue to use the F class frame peaking turbine as the proxy unit for setting the cost of new entry. It also continued the requirement that peaking plants include dual-fuel capability and selective catalytic reduction (SCR) emissions controls for the New York City, Long Island and G-J Locality demand curves.

But the commission rejected the ISO’s proposal to extend the SCR requirement to the NYCA, where gas-only designs were permitted.

The curves, calculated for NYISO by consulting firm Analysis Group, suggest increased prices in most zones, with Zones G-J starting at about $22/kW-year, up from less than $20 for 2014/15. Long Island’s curve starts at almost $25, versus about $21 in the previous curve. The New York City curve is virtually unchanged with a $26 starting point.

The NYCA curve would have jumped from a starting point of about $14 to almost $20.

In its last demand curve reset, the ISO proposed that the NYCA peaking plant operate under an annual operating hours limit in lieu of installing SCR emissions controls. FERC said that assumption still holds, despite the ISO’s contention that peakers without the controls risk not obtaining necessary air permits.

“It is undisputed that SCR emissions controls are not required for peaking plants located in load zones C and F in NYCA,” the commission said. “In addition, NYISO admits that the F class frame turbine can meet the New Source Performance Standard requirement to limit nitrogen oxides emissions while operating on natural gas without SCR emissions controls.”

The ISO acknowledged that F class turbines can meet New Source Performance Standards for carbon dioxide emissions without SCR controls by limiting their operations to 3,300 hours annually, a capacity factor limit of 38%.

The Independent Power Producers of New York joined the ISO in calling for the SCR inclusion, contending that increasing concern in New York over fossil fuels will pressure the state’s Siting Board to require tougher controls.

FERC said their position was “speculative,” quoting from its order in the last reset that “while there is always a risk that regulations will change in the future, we cannot base the finding of viability on speculation that the EPA or New York state regulators will act at some point in the future.”

It noted that the demand curve reset process takes place every four years “so that changed circumstances, such as new regulations, can be taken into account.”

“We find more compelling the statements from [the New York State Department of Environmental Conservation] and evidence that New York state has issued air permits and Article 10 certificates for electric generators without SCR emissions controls in recent years. Specifically, NYSDEC stated in its comments to the NYISO Board of Directors that its permit reviews are fact specific, so SCR emissions controls to limit nitrogen oxides emissions “may not be required or appropriate in every case, such as where other control measures are available or where a facility accepts federally enforceable permit conditions to limit emissions below the applicable thresholds.

“We are more persuaded by NYSDEC’s comments and N.Y. Siting Board precedent than speculation about future public involvement in [plant] certification proceedings,” the commission said.

The commission ordered the ISO to file a revised Tariff within 30 days removing the SCR requirement for NYCA.

FERC otherwise approved the ISO’s filing as is, siding with it on the choice of the F class turbine, peaking plant costs, property tax treatment, natural gas forecasts, and incorporation of shortage pricing into the net energy and ancillary services revenues assumptions.

The auction for the 2017 summer capability period (May 1- Oct. 31) will be conducted March 30-31, with results posted April 4.

January 25, 2017

FERC Reopens Western Energy Crisis Refund Proceeding

By Robert Mullin

Two energy sellers that engaged in market manipulation during the Western Energy Crisis of 2000/01 will be prohibited from using the costs associated with illegal trading activity to offset the amount of money they’re expected to refund back to California, FERC has ruled.

The commission will also hold an evidentiary hearing to determine which cost offset claims submitted by Shell Energy North America and Hafslund Energy Trading stemmed from crisis-period trading practices such as “false exports,” “phantom ancillary services” and “false load scheduling” — all of which contributed to the widespread manipulation that bilked California ratepayers for billions of dollars (EL00-95-295). (See related story, FERC Denies Multiple Energy Crisis Rehearing Requests.)

ferc western energy crisis — Bankrupted by high wholesale electricity costs during the 2000-01 Western Energy Crisis, Pacific Gas and Electric is party to the ongoing proceedings related to market manipulation during the period.

“We find that sellers should not be permitted to offset their refund liability by the costs incurred while engaged in activities in violation of the then-effective tariffs,” the commission said in its Jan. 23 order.

Under the commission’s refund methodology, prices for all short-term sales into CAISO and the now-defunct California Power Exchange are to be capped at a specific “mitigated market clearing price,” with sellers expected to refund amounts above that level.

The commission initially allowed generators who believed that the mitigated price did not cover their operating costs to file cost-of-service rates in order to recover full costs, a provision that was later extended to energy marketers such as Shell and Hafslund for recovery of costs associated with their transactions.

FERC’s decision comes after California petitioned the 9th U.S. Circuit Court of Appeals to contest the commission’s previous acceptance of cost offsets submitted by Shell and Hafslund, a petition that the court held in abeyance.

The California parties — which include the state’s attorney general, the California Public Utilities Commission, Pacific Gas and Electric and Southern California Edison — later filed a brief with the commission contending that the two companies’ offset claims included costs associated with illegal trading activities.

The commission last year took up the issue on voluntary remand after getting approval from the 9th Circuit.

FERC’s decision reopens the record on the proceeding and allows participating parties to supplement existing information. The commission also encouraged the parties to reach a “mutually acceptable” settlement ahead of a new hearing.

“We note that there have been numerous settlements already filed and approved by the commission in the refund proceeding and related proceedings,” FERC said.

January 24, 2017

PJM Markets and Reliability and Members Committees Preview

Below is a summary of the issues scheduled to be brought to a vote at the Markets and Reliability and Members committees Thursday. Each item is listed by agenda number, description and projected time of discussion, followed by a summary of the issue and links to prior coverage in RTO Insider.

RTO Insider will be in Wilmington, Del., covering the discussions and votes. See next Tuesday’s newsletter for a full report.

Markets and Reliability Committee

2. PJM Manuals (9:10-9:30)

Members will be asked to endorse the following manual changes:

A. Manual 11: Energy & Ancillary Services Market Operations and Manual 12: Balancing Operations. Revisions to account for the updated regulation requirement developed by the Regulation Market Senior Issues Task Force. (See “Regulation Requirement Changing from ‘Peak’ to ‘Ramp,’” PJM Operating Committee Briefs.)
B. Manual 27: Open Access Transmission Tariff Accounting. Revisions developed as part of an annual review of the manual.
C. Manual 38: Operations Planning. Revisions developed as part of a periodic review to provide more clarity on outage coordination.
D. Manual 40: Training and Certification Requirements. Revisions proposed to reduce the grace period for completing operator training. (See “Manual 40 Revisions Approved with Exelon’s Addendum,” PJM Operating Committee Briefs.)

3. PJM Capacity Problem Statement/Issue Charge (9:30-10:00)

Members will be asked to endorse a proposed problem statement and issue charge regarding PJM’s Reliability Pricing Model. (See “Stakeholders Remain Skeptical of Campaign to Revisit CP,” PJM Markets and Reliability Committee Briefs.)

4. Underperformance Risk Management Senior Task Force (URMSTF) (10:00-10:15)

Members will be asked to endorse proposed revisions to the Tariff and Reliability Assurance Agreement specifying requirements for external resources seeking qualification under Capacity Performance rules. (See No End in Sight for PJM Capacity Market Changes.)

5. Energy Market Uplift Senior Task Force (EMUSTF) (10:15-10:45)

Members will be asked to endorse a Phase 1 proposal endorsed by the task force and to discuss whether to proceed with a vote on the Phase 2 proposal in light of FERC issuing a Notice of Proposed Rulemaking on the topic last week. (See related story, FERC Proposes More Transparency, Cost Causation on Uplift.)

6. Market Operations Price Transparency (10:45-11:00)

Members will be asked endorse a proposed problem statement and issue charge regarding increased information releases under the NOPR.

7. Operating Parameters (11:00-11:15)

Members will be asked endorse proposed revisions to the PJM Tariff, Manual 11: Energy & Ancillary Services Market Operations, Manual 12: Balancing Operations and Manual 28: Operating Agreement Accounting regarding operating parameters. (See “Operating Parameters, ARR Enhancements Endorsed,” PJM Market Implementation Committee Briefs.)

8. Governing Documents Enhancement & Clarification Subcommittee (GDECS) (11:15-11:30)

Members will be asked endorse proposed Tariff, Operating Agreement and RAA revisions that clean up definitions.

Members Committee

Consent Agenda (2:20-2:25)

Members will be asked to endorse:

B. Operating Agreement revisions associated with residual auction revenue rights enhancements.
C. Revisions to the Tariff resulting from discussions at special Planning Committee sessions regarding new service request cost allocation and study methods. (See PJM Considering Injection Rights for Demand Response.)
D. Tariff and Operating Agreement revisions developed by the GDECS.

1. Security & Resilience Advisory Committee (1:25-1:40)

Members will be asked to approve a proposed charter for a new Security & Resiliency Committee. (See “Preview of Security Committee Receives Tepid Response,” PJM Markets and Reliability and Members Committees Briefs.)

2. Underperformance Risk Management Senior Task Force (URMSTF) (1:40-2:00)

Members will be asked to endorse proposed Tariff and RAA revisions specifying requirements for external resources seeking qualification under CP rules. (See MRC item 4 above).

– Rory D. Sweeney

January 24, 2017

Strategic Planning Committee to Continue Work on Tx Cost Shifts

By Tom Kleckner

DALLAS — During an unusually animated meeting last week, SPP’s Strategic Planning Committee eventually agreed that it was the correct body to take up the contentious issue of cost shifts when new members join existing transmission-pricing zones.

“I think this is a policy decision all the way, and this is where [the discussion] should be held,” SPP Director Harry Skilton said.

spp strategic planning committee transmission — SPP Director Harry Skilton, SPP COO Carl Monroe follow Denise Buffington’s presentation on zonal allocation charges. | © *RTO Insider*

Skilton’s comments were echoed by other members — and by staff — and helped wrap up an hour-long discussion that revisited charges over whether SPP had circumvented the stakeholder process last October, when Kansas City Power & Light’s proposal to revise the zonal-placement criteria was pulled from the Regional Tariff Working Group and given to the SPC. (See SPP Moves to Head off KCP&L Measure on Tx Cost Shifts.)

After several stakeholders said the stakeholder-driven process had been overridden when KCP&L’s revision request had been “arbitrarily” pulled from the RTWG, SPP CEO Nick Brown grabbed a microphone.

“I take issue with the use of the word ‘arbitrarily,’” Brown said. “From a strategic perspective and a regulatory perspective, and in many board members’ view, we were heading down a road that would not have been good for our reputation. We would have been using the wrong tools, and there were a lot of people involved in that debate.”

“This characterization that we have hijacked the process is just false,” said Michael Desselle, SPP’s vice president of process integrity. “We have followed the process.”

Several members pointed a finger at South Central MCN’s Noman Williams, who chaired the Markets and Operations Policy Committee last year, for taking KCP&L’s proposal (RR 172) away from the RTWG. Williams did not attend last week’s SPC meeting, but he later said that he and RTWG Chair David Kays, of Oklahoma Gas and Electric, discussed where the revision request belonged.

Kays “recognized the potential for broader policy issues,” Williams told RTO Insider. “I agreed and said I thought there were broader policy issues that had historically resided at the SPC and board, and that I would suggest that the RR also be presented and reviewed at the October SPC to determine if there needed to be additional discussion and guidance.”

KCP&L’s Denise Buffington | © *RTO Insider*

Denise Buffington, KCP&L’s director of energy policy and corporate counsel, said her preference was to send RR 172 back to the RTWG and then the MOPC and Board of Directors.

She is also open to other ideas.

“If someone can bring me a better solution that solves my equity issue and cost-shifting issue, I’m all ears,” she said. “I’m willing to negotiate or take someone else’s ideas. I don’t want to spend another six, eight or 10 months in a working group or task force to try and solve a problem that’s a real problem today.”

Buffington said KCP&L would probably file a complaint at FERC and “get a change made there” should the SPC not resolve RR 172 “to our satisfaction and in a timely manner.”

“I agree this is an issue that needs to be resolved. I agree with the urgency,” Brown responded, suggesting the process would drag out further if the RTWG continued to handle KCP&L’s proposal. “You could file a [Section] 206 [complaint] with FERC today. My response to FERC would be, ‘Please give us the opportunity to resolve this through the stakeholder process. Every time we’ve done that in the past, [our request has] been granted.”

“We are open to having it resolved [in the SPC], but we are not interested in it being paralyzed by the SPC,” Buffington said Monday.

Buffington agreed to keep KCP&L’s proposal within the SPC, but she said she wants a discussion and vote if no progress has been made before the April MOPC meeting. “There is a process in place, and I want it followed,” she said.

The SPC agreed to schedule another meeting within a matter of weeks to continue its discussion of RR 172 and review specific policy language from staff, but no date has yet been set.

The committee in October agreed to defer action on RR 172 pending alternative proposals from SPP. Staff returned last week with a straw proposal for zonal placement criteria for existing facilities. That plan limited the scope to integrating existing facilities with the zonal annual transmission revenue requirement (ATRR) costs under Schedule 9 of the RTO’s Tariff, or a current transmission owner’s purchase of existing facilities that would be included in its zonal ATRR.

The SPC agreed unanimously to codify SPP’s criteria for determining whether to put transmission facilities and the ATRR into an existing pricing zone or create a new one, but there was some disagreement on whether or not staff’s current criteria will be sufficient.

Those criteria include:

Whether the new TO’s ATRR is less than that of an existing zone with the smallest ATRR;
The extent to which a new TO’s facilities are embedded within a pre-existing zone;
The extent to which a new TO’s facilities are integrated with (including number of interconnections) an existing TO’s facilities; and
The extent to which the new TO’s facilities substantively increase the SPP footprint.

KCP&L said its proposal is designed to strike a balance between attracting new transmission-owning customers to SPP and eliminating the unnecessary and unfair potential for new members to shift costs to existing members by codifying SPP’s zonal selection criteria in the Tariff. The revision is intended to establish a bright line between the costs of legacy transmission and new facilities planned by SPP.

Buffington said its revisions to RR 172 provides a bidirectional approach to protect both new TOs and new and existing transmission customers from paying for facilities that were not jointly planned. Following the new TO’s integration into the RTO, all SPP-studied and approved projects would be allocated in accordance with its Tariff, she said.

KCP&L has been driven by SPP’s decision to put the City of Independence, Mo., into the utility’s transmission pricing zone, a move Buffington last year said “blindsided” the utility and led to a multimillion cost shift to its customers. The KCP&L zone has some of the lowest transmission costs among SPP’s 19 zones, thanks to the Kansas City area’s load.

“The crux of the problem for KCP&L is there’s a price impact to us when someone comes into our zone,” Buffington said. “We tried to put a bright line out there so people know what to expect going forward and so people can know what to expect when they become a member of SPP.”

SPP’s Michael Desselle, Golden Spread Electric Co-Op’s Mike Wise lead the Strategic Planning Committee meeting. | © *RTO Insider*

“I don’t want to build walls to prohibit people from coming in,” American Electric Power’s Richard Ross said, “but I don’t want to do things that cause detriment to our existing customers.”

Several stakeholders have spoken out against the proposal’s hold-harmless provisions, in which new TOs would have their facility costs allocated to their load and current zonal TOs and customers would have the costs of their facilities allocated to their load. They assert this gets away from SPP’s concept of transmission providing value to the SPP system, not those who built it.

Brett Hooton, vice president of business development for South Central MCN, called RR 172’s hold-harmless provisions “anti-competitive, unduly discriminatory and a logistical nightmare.” He also said the proposal’s “unintended consequences” have yet to be vetted and discussed.

“This impacts all segments of SPP membership,” Hooton said. “The focus should be on areas with broad stakeholder agreement [zonal placement criteria and informational requirements], rather than forging ahead with a controversial hold-harmless proposal that is also contrary to the principle that networked transmission can provide value to the Bulk Electric System.”

SPC Agrees to Reconstitute Congestion Hedging Group

The SPC also agreed to reconstitute the Congestion Hedging Task Force to address the large amounts of wind energy and other renewables that could come online in the future. SPP has 21,535 MW in its interconnection queue, on top of 15,728 of installed wind energy.

The CHTF would report to the MOPC. The committee’s chair, Paul Malone of the Nebraska Public Power District, said he would work with staff to move the task force forward.

January 24, 2017

SPP Markets and Operations Policy Committee Briefs

DALLAS — SPP’s Markets and Operations Policy Committee last week overwhelmingly approved a Tariff revision request that would replace the old capacity margin terminology with a 12% planning reserve margin requirement, the RTO’s first such change since 1998.

SPP MOPC Markets and Operations Policy Committee — Richard Ross, AEP | © *RTO Insider*

The Regional Tariff Working Group’s (RTWG) RR 187 also incorporates previously approved policies that identify who is responsible for resource adequacy, the resource adequacy requirement and how and when the requirement can be and should be met.

The Capacity Margin Task Force, which spent two years developing the policies, expects that lowering the planning reserve margin (PRM) from 13.6% will reduce SPP’s capacity needs by about 900 MW and save members $1.35 billion over 40 years. (See SPP to Cut Planning Reserve to 12%, Reduce Capacity Needs by 900 MW.)

The policies will become effective this summer pending final approval from the SPP Regional State Committee and the Board of Directors/Members Committee next week and a filing at FERC, with the exception of the resource adequacy assurance policy, or the enforcement mechanism. That policy requires entities short on their PRMs to make payments to entities with excess capacity, based on forecast information.

The RTWG suggested using 2017 as a trial run.

A deliverability study is currently being prepared for the summer. It gives load-responsible entities another option to use “deliverable” capacity on a short-term basis for meeting their planning requirements, instead of requiring firm transmission service. Firm service is still required for load and available for PRM capacity.

“This is a super set of work by the task force and the RTWG, and we need to move forward with it,” American Electric Power’s Richard Ross said. “If somebody needs to fix something, they can prepare a revision request and send it through the [stakeholder] process.”

Tenaska cast the lone dissenting vote against the measure, while nine other members abstained. Eight members abstained when the revision was voted out of the RTWG.

The policies were established by the Capacity Margin Task Force, which then turned the work of drafting a revision request over to the RTWG. The working group estimated that it spent 93 meeting hours on its work, with 20 to 25 attendees at every meeting.

Regional Cost Allocation Remedies Rejected

Ross said he would use the same stakeholder process to appeal the MOPC’s rejection of a business practice that documents the potential Regional Cost Allocation Review (RCAR) remedies and clarifies the process to be used when implementing a remedy.

The measure failed when it received only 58.5% favorable votes, against 17 opposing votes and 12 abstentions.

Ross said he would take his appeal to the board next week.

“I’m comfortable where it is, personally, for my company,” Ross told the SPP Strategic Planning Committee on Thursday. “But we shouldn’t kill it at that stage without other [Regional State Committee] members and the directors having a chance to weigh in on it.”

Originally written as a Tariff revision and rejected by FERC over a lack of detail, RR 155 outlines the processes for analyzing, approving and implementing potential remedies for transmission-pricing zones that fall below the RCAR process’s approved threshold.

Several working groups passed the revision request, but with opposition. Some stakeholders felt the practice was “deficient” in how remedies would be implemented, Ross said. The remedies include accelerating planned upgrades, zonal transfers to offset costs or a lack of benefits to a zone, and changing cost-allocation percentages.

“The major concern was if it’s put in the Tariff, it would simply be implemented without an ability to object,” Ross said. “Putting it in a business practice should not take away the rights to object at FERC.”

“Turning it into a business practice remains our major opposition to this,” said Southwestern Public Service’s Bill Grant. “We protested this at FERC. We don’t think it’s needed. We would prefer going through the regular planning process and if there’s a solution there, to go forward with it.”

Speaking for the city of Springfield, Mo., which has been hampered by a low benefit-to-cost ratio in its zone, Jeff Knottek said he would support the measure.

“This language has been around for a number of years,” said Knottek, the city’s director of transmission planning and compliance. “We’re putting our trust in the process and hopefully we’ll get some relief with the transmission-expansion process.”

Variable Demand Curve Approved

The MOPC endorsed the SPP Market Working Group’s (MWG) revision request to use a variable demand curve that moves SPP toward “a more robust valuation of regulation and operating reserve” and more accurately addresses and values operating and energy shortages during scarcity events.

Ross, the MWG’s chair, said RR 198 would mitigate stakeholder concerns related to FERC Order 825, which established settlement interval and shortage-pricing requirements for organized markets.

Golden Spread Electric Cooperative’s Mike Wise cast the lone opposing vote, once again expressing his concerns over SPP’s use of reliability unit commitment to avoid scarcity pricing situations. Shell Energy abstained. (See “RUC, Shortage Pricing Practices Challenged,” SPP Board of Directors/Members Committee Briefs.)

“It’s a step in the right direction, but it’s not far enough,” Wise said. “SPP operations is mitigating all of this anyway. The inappropriate use of RUCing is destroying shortage pricing and pricing around intervals, which isn’t allowing the correct market signals.”

Responding to Wise, Ross said the MWG had listened to Golden Spread’s concerns and those of others, and changed both the size and number of steps in the process. “It’s best we move forward at this point,” he said.

MOPC’s Consent Agenda Endorses 10 Revision Requests

SPP Stakeholders pulled a compliance-driven revision request from the consent agenda before unanimously passing the measure.

RR 195 simplifies the process of SPP’s “data specification” document required by NERC Reliability Standards IRO-010-2 and TOP-003-3 and makes basic formatting changes to the RTO’s operating criteria document.

SPP’s Casey Cathey requested the revision be approved in order to begin making the formatting changes. He said staff’s intention is to come back to the MOPC in April for final approval of the document.

The nine other revision requests on the MOPC’s consent agenda, which passed unanimously, included:

BPWG-RR122: Clarifies how the Tariff’s re-dispatch costs are determined and settled through the Integrated Marketplace, deletes obsolete language and clarifies long-term congestion rights for service subject to re-dispatch, and updates the business practices to reflect current practices.
ORWG-RR134: Clarifies previously ambiguous operating criteria language for the initial submission and subsequent updates of unit de-rate information in SPP’s control room software system.
BPWG-RR143: Retires a business practice that managed congestion through the re-dispatch of firm service, which became obsolete with the Integrated Marketplace.
MWG-RR190: Corrects SPP’s definition of residual transmission system capability by adding a missing variable in the protocols and clarifies that previous awards are considered in annual and monthly FTR allocations and auctions.
MWG-RR191: Clarifies that there should not be a requirement to reprice the day-ahead and/or real-time markets for every data input/software error.
MWG-RR192: Removes the Violation Relaxation Limits (VRL) report’s quarterly reporting requirement, which is covered in greater detail through other means, such as monthly reports to the Market Working Group, the Market Monitoring Unit’s annual State of the Market report and the Operations Annual VRL report.
BPWG-RR194: Aligns network integration transmission service practices with the new OASIS functionality as of March 1, as required by FERC.
RTWG-RR197: Completes the MMU’s annual review of frequently constrained areas by updating the list of constraints and resources.
MWG-RR199: Quarterly settlement clean-up clarifying how some of the calculations work and allowing market participants to better shadow the calculations.

The consent agenda also included several annual charter changes for some stakeholder groups. The committee pulled a request to make the Competitive Transmission Process Task Force — charged with improving SPP’s FERC Order 1000 processes — a standing task force. MOPC Chair Paul Malone, with the Nebraska Power Public District, said he believed task forces should have a time limit and be folded into a working group should there still be a need for their work.

After a brief discussion, Grant, the group’s chair, agreed to a two-year extension for the task force.

“Hopefully, once we’ve gone through one or two [Order 1000] processes, we’ll have a good process,” he said. “We’ve only had one [Order 1000] process, and until we have a couple more, don’t be surprised if we don’t ask to be extended for another couple of years.”

– Tom Kleckner

January 24, 2017

SPP MOPC Endorses 14 Tx Projects over Objections

By Tom Kleckner

DALLAS — SPP stakeholders last week endorsed $201.5 million in transmission projects as part of the RTO’s Integrated Transmission Planning process, despite objections from several entities.

The ITP’s final 2017 10-Year Assessment recommended 14 projects in the southern part of SPP’s footprint, clustered in the Texas-Oklahoma Panhandle and along its eastern seam. Staff said the projects have an annual production cost benefit of $59 million and will solve long-standing congestion issues in West Texas.

Bill Grant, director of strategic planning for Southwestern Public Service, pushed back against the Transmission and Economic Studies working groups’ recommendation to the Markets and Operations Policy Committee, saying a 90-mile, 345-kV line in SPS’s service territory is “the right project but the wrong time.”

The proposed $144 million project would run southwest of Amarillo to SPS’s Tolk Generating Station near Muleshoe. Tolk consists of two 350-MW coal-fired units that date back to the early 1980s. SPS is currently evaluating whether to keep the plant operating.

“We think it’s a good project, but it’s not a good economic project at this time,” Grant told RTO Insider. “We think it’s best as a long-term project. If we do shut the plant down, restudying the project makes sense.”

Grant said SPS will be making some “major resource decisions” over the next few years. He said one of his company’s customers will begin buying power from one of its own affiliates, an unnamed SPP member, leaving SPS in a “resource flux.” Grant said he expects the resource plan to “clarify the need for this line in time.”

Tolk was one of seven Texas coal plants targeted by EPA for affecting air quality in the Big Bend and Guadalupe Mountains national parks along the Mexican border. The agency in November withdrew a requirement that the plants reduce their emissions, but Tolk is still facing potential future water-supply shortages.

“The concern we have is the removal of [the] regional haze [rule] changes the outlook,” Grant said. “I’m not questioning the analysis, but I am questioning the timing of the recommendation, because there’s so much unknown at this time.”

The company sees a long-term need for a 345-kV line in that area but would “feel better” about a decision in the future, he said.

SPP staff said the project would ease congestion in the corridor but could also avoid potential costs of up to $120 million from incremental upgrades in future studies. Staff also said the Potter-Tolk line improves voltage stability limits in SPS’s south load pocket and would ease a generation interconnection queue filled with wind projects.

“There is a significant price difference between resources in the southern end and SPS resources in the north,” said Antoine Lucas, SPP’s director of transmission planning. “Cheaper energy is looking to flow south, but a lack of transmission is causing a constraint and driving costs up in the SPS zone.”

Grant cast one of seven opposing votes against the recommendation. Eight other members abstained.

“I’m just trying to caution [everyone],” Grant said. “I don’t want to go through another Walkemeyer, but that may be exactly where we’re headed.”

Grant was referring to SPP’s first competitive project under FERC Order 1000, which was awarded to the incumbent transmission owner but then pulled when changing load projections rendered the project moot. SPP staff will determine whether any of the 14 projects will be deemed competitive projects. (See SPP Cancels First Competitive Tx Project, Citing Falling Demand Projections.)

The Potter-Tolk line was one of two projects staff identified through an “alternative project analysis” to evaluate needs in support of SPP initiatives along the seams or solving congestion and operational problems.

That analysis also recommended a 345/161-kV transformer and 161-kV line upgrade in southwestern Missouri near Springfield. The line connects to an Associated Electric Cooperative Inc. substation in Morgan and could qualify as a seams project pending negotiations with AECI. (See “SPP-AECI Joint Study Recommends Two Projects,” SPP Seams Steering Committee Briefs.)

SPP staff also performed additional analysis to ensure that transmission model updates and the 2016 near-term projects were included in its recommendations.

The 2017 ITP10 considered three futures: regional and state approaches to carbon reductions as a result of the now-endangered Clean Power Plan, and a business-as-usual reference case.

Supplemental Analysis Incorporated into 2017 ITPNT

The MOPC unanimously endorsed the TWG’s supplemental analysis incorporating newly issued and withdrawn notices-to-construct (NTC) from the 2016 ITP Near-Term Assessment into the 2017 ITPNT. The additional analysis helped better inform the ITPNT decisions because the NTCs and withdrawals occurred after the 2017 ITP10 models had been completed.

Lucas said the supplemental analysis was done to help bridge the gap between the ITP’s new and old processes. A final near-term assessment will be conducted for 2018.

MOPC Chair Paul Malone asked Lucas whether SPP also analyzes the transmission systems of new members coming into the RTO.

“We look at the existing systems based on SPP criteria and ensure the necessary upgrades have been completed before they roll into the network,” Lucas said.

As part of its analysis, staff evaluated 420 detailed project proposals — down “significantly” from years past, Lucas said — and made 131 model corrections.

A draft 2017 ITPNT portfolio was issued Jan. 6. Transmission owners and interested competitive developers will have until Feb. 3 to provide study cost estimates to SPP. An updated project portfolio will be shared during a Feb. 23 planning summit, and a draft report and recommendations will be made for the April MOPC and Board of Directors meetings.

MOPC Approves Change to Renewables Modeling

The MOPC also endorsed a revision to the Transmission Process Improvement Task Force’s (TPITF) white paper that the committee approved last July. The TPITF has been charged with combining SPP’s various planning efforts into one annual cycle, set to begin in 2018.

In recommending a common planning model, the task force has first suggested modeling renewable facilities with firm service at their highest summer output over a three-year period, with off-peak and light load modeled at 100% of firm service.

The new language recommends those resources with firm service “be modeled in the summer peak base scenario model at each facility’s latest five-year average for the SPP coincident summer peak, not to exceed each facility’s firm service.” Non-firm service will be modeled at zero.

The measure passed with four abstentions.

Brian Gedrich, the group’s chair and executive director of development for NextEra Energy Transmission, said the change was necessary because SPP’s wind output has been approaching 100% firm transmission-service levels during summer peak conditions.

However, several MOPC members expressed their concern with their inability to use SPP’s financial hedging instruments to pay for congestion costs.

“We build to the specifics of firm transmission … but [financial transmission rights] are not happening. We have an obligation to manage that,” Grant said. “This proposal is a compromise — a good compromise — but our concern is not being financially hedged against projects where we’ve paid for an upgrade, and then [do] not get the hedge.”

“This impacts our customers,” said Oklahoma Gas & Electric’s Greg McAuley. “They’ve had to pay for firm service, and now they’re paying congestion charges and new transmission charges. As we’ve discussed here, we really don’t have a hedge. All this planning, yet customers are paying for all this congestion. We’re asking ourselves, how did we end up like this?”

“We’re on a journey. This is a first step,” Gedrich said. “We may find over time this five-year average is too generous, it’s too optimistic.”

Nearly $2B in Projects Completed, Approved in 2016

SPP staff reported that members completed 78 upgrades totaling $939 million in 2016, while NTCs were issued for another 138 projects worth an additional $992 million.

ITP projects accounted for $1.4 billion of the total: $582.3 million for 44 completed projects and $859.5 million in NTCs.

The projects are part of SPP’s Transmission Expansion Plan. The MOPC unanimously endorsed staff’s recommendation that the board accept the 2017 STEP report as documenting completion of the Tariff’s Attachment O transmission planning process.

January 24, 2017

ISO-NE Opens First Public Policy Process Under Order 1000

By William Opalka

WESTBOROUGH, Mass. — Stakeholders have until Feb. 25 to comment in ISO-NE’s first implementation of the public policy requirements of FERC Order 1000.

The RTO is seeking stakeholder comments on federal, state and local statutes and regulations that could require new transmission.

FERC order 1000 public policy ISO-NE — | *Avangrid*

It is the first of an eight-step process outlined to the Planning Advisory Committee on Wednesday that could result in a transmission study and a competitive procurement. Comments should be emailed to PublicPolicy@iso-ne.com.

The New England States Committee on Electricity (NESCOE) has until April 1 to identify federal and state policy requirements. The RTO also can identify such requirements, along with local (municipal and county) requirements. Stakeholders’ responses to NESCOE will be due 15 days afterward.

If transmission needs are identified as a result of the process, the RTO will provide a draft scope for a public policy transmission study.

Current rules call for ISO-NE to provide a draft scope for the study by June 1, although it is seeking a Tariff change to push the date back to Sept. 1.

If the RTO decides to seek a transmission upgrade, it will invite qualified transmission project sponsors to submit proposals. After evaluating the proposals and PAC input, the RTO will narrow the “stage one” proposals to finalists eligible to submit more detailed “stage two” proposals, one of which will be selected as the preferred solution.

ISO-NE will monitor milestones until the project is completed and in service.

EPA’s Clean Power Plan, which was expected to result in transmission to connect renewable generation with load, is in jeopardy under the Trump administration. But New England states are expected to continue their efforts to decarbonize through power purchase agreements and potentially tighter emission caps under the Regional Greenhouse Gas Initiative — initiatives that could require transmission investments. (See New England to Charge Ahead on Clean Energy Makeover in 2017.)