Search
`
November 9, 2024

Panelists Weigh Nuclear Waste Solution Post-Obama

By Rich Heidorn Jr.

WASHINGTON — Little more than a month after taking office in 2009, President Barack Obama ordered the Nuclear Regulatory Commission to stop work on a permit for licensing the nuclear waste depository at Yucca Mountain in Nevada. Obama acted at the behest of then-Sen. Harry Reid (D-Nev.).

Left to right: Zach, Spencer and McKenna | © RTO Insider

The license application for the site, almost 140 miles northwest of Las Vegas, was the product of 30 years of work and $15 billion in spending, and the cancellation outraged nuclear operators and state regulators.

Zach | © RTO Insider

With Reid retired and a new president in office, two major political obstacles to Yucca are gone. But that doesn’t mean it will be quick or easy to solve the problem that has left the waste stored at almost 100 nuclear sites around the country.

“The last eight years has … just been a major setback for our nuclear waste policy,” Andy Zach, a staffer on the House Energy and Commerce Committee, told the National Association of Regulatory Utility Commissioners.

“It is going to take us a long time to dig out from where we are. That goes across the board: setting up an organization; reconstituting the key support contractors who did the work on the license application. … There has been an atrophy of talent, physical assets and a knowledge base that is going to have to be rebuilt.”

McKenna | © RTO Insider

Michael McKenna, president of lobbying firm MWR Strategies, said the government has to be “nimble” enough to move toward Yucca and also develop an interim storage facility until the site is approved and ready to accept shipments.

But Jack Spencer, vice president of the Heritage Foundation’s Institute for Economic Freedom and Opportunity, said he believes an interim site is a mistake. “I think it releases all the pressure to complete Yucca Mountain,” he said.

Spencer said he believes Nevada’s opposition to the site can be overcome.

“I think that Nevada probably is largely against nuclear waste at Yucca Mountain in the context of it’s been [forced on it].

Spencer | © RTO Insider

“I am nothing if not a believer in a free market, and I think most things have a price on them. And I think by … empowering [Nevada] to have some regulatory control — to say, ‘This is what it’s going to cost you’ — I think that we will probably negotiate something that will lead to a solution there.”

Spencer also said the 1982 Nuclear Waste Policy Act, which directed the Department of Energy to build a repository for used nuclear fuel and other high-level radioactive waste, should be rewritten.

“I think ultimately what we need in order to have the system work is to have the waste producers responsible for waste management,” he said. “My theory is [utilities] can do it cheaper than the government.”

NE Power Pool Extends IMAPP Timeline

By William Opalka

The New England Power Pool’s Integrating Markets and Public Policy collaborative process will suspend its monthly meetings until May to allow ISO-NE more time to develop a market design for accommodating state-sponsored clean energy contracts without disrupting the Forward Capacity Market.

In addition to providing the RTO with time to develop a “conceptual market approach that could be implemented in the near term,” the delay will give states time to analyze long-term proposals discussed to date and for them to hold “off-line” discussions with stakeholders, IMAPP Chair William Fowler said in a memo released Wednesday.

NEPOOL IMAPP clean energy

ISO-NE’s proposal could be presented to the IMAPP group as soon as May and implemented for FCA 13 in February 2019, which will procure resources for the 2022/23 capacity commitment period. Any proposed market rule changes to its Tariff would require FERC approval.

NEPOOL Secretary David T. Doot told RTO Insider that FERC’s plans for a technical conference were cited by one IMAPP participant in a conference call Thursday as another reason to go slow. (See related story, LaFleur Plans Technical Conference on State Generator Supports.)

The original timeline set out last summer had hoped to have NEPOOL complete its work in December 2016. A revised schedule issued in November contemplated a proposal sent to ISO-NE by the second quarter of this year.

“The ISO’s near-term priority is for the region to develop a workable proposal for accommodating state-supported resources while minimizing their potential to suppress FCM prices and affect regional reliability,” ISO-NE spokesman Marcia Blomberg said.

Stakeholders in the IMAPP process have identified multiple paths to accommodating clean energy resources, including the introduction of a price on carbon or a two-tiered approach to the FCM that creates a separate class for clean energy. (See Markets vs. Climate Goals the Subject at NECA Conference.)

NEPOOL IMAPP clean energy

New England is the furthest ahead in contemplating the effects of out-of-market contracts on wholesale electricity markets, but the issue is gaining currency in NYISO and PJM. Three New England states are currently reviewing out-of-market long-term contracts for clean energy procurement. (See New England to Charge Ahead on Clean Energy Makeover in 2017.)

“Once the ISO has a market-based proposal, it would go through the NEPOOL Markets Committee for discussion. With recent state targets in mind, the ISO anticipates needing a near-term solution in place for FCA 13, likely requiring a FERC filing by the end of 2017 to impact the March 2018 FCM windows [for resource qualification]. The ISO is examining options and is targeting additional stakeholder discussions by May 2017,” Blomberg said.

Work on proposals will continue among stakeholders over the next several months, with interim IMAPP updates provided at NEPOOL’s monthly Participants Committee meeting.

“These are very complex discussions and sometimes there were reasons for a high [degree of] optimism and other times a low [degree of] optimism,” said Doot, an attorney with Day Pitney. “But this is hard and it’s going to take some time.”

LaFleur Plans Tech Conference on State Generator Supports

By Rich Heidorn Jr.

WASHINGTON — Acting FERC Chairman Cheryl LaFleur said Tuesday that the commission will schedule a staff-led technical conference on how wholesale power markets can accommodate state policymakers’ initiatives to support generation.

Speaking to the winter meeting of the National Association of Regulatory Utility Commissioners, LaFleur noted that the commission has pending complaints challenging the zero-emission credit programs created by Illinois and New York to prevent their nuclear plants from retiring. The cases cannot be resolved until the commission regains the quorum it lost with the Feb. 3 resignation of former Chairman Norman Bay.

ferc lafleur technical conference
Acting FERC Chair Cheryl LaFleur Talks to NARUC President Robert Powelson at the NARUC Winter Committee Meetings | © RTO Insider

“We have several cases pending that raise those issues. While we can’t issue orders in those cases, one thing that [Commissioner] Colette [Honorable] and I have talked about that we can do is to organize a staff-led technical conference to bring people in before us, build a record and hear from the states, from the environmental community, from others — from the generators and the ISOs — to try and discuss some of those issues. So that’s something we are going to do.”

LaFleur noted that ISO-NE and PJM made changes to their capacity markets “to try to make sure that they were properly rewarding the resources you could always count on to be there when most needed,” a reference to the Pay-for-Performance program in ISO-NE and Capacity Performance in PJM.

“What the markets do not currently do is compensate nuclear resources for their carbon-free attributes. The markets weren’t designed to do that and that’s something the state programs are seeking to do,” she said.

“I think we only have three choices here: One is for the stakeholders and the ISOs in part to somehow have a design solution that retains the benefits of the competitive markets for customers but in a way that adapts to some of these state issues. That’s door one.

“Door two is we can litigate it out. I loved winning the [Order 745] case in the Supreme Court, but litigation is never my first choice for how to resolve things.

“And door three is some kind of gradual reregulation. … If the states want to reregulate, that’s fine, but I’m concerned that we’ll have unplanned reregulation as the markets just get cannibalized and we lose some of the reliability benefits for customers.

“So door one — making a decision to work this out and adapt the markets — is by far the best solution, and we’ll need the help of all the smart people in this room to do that.”

NARUC President and Pennsylvania Public Utility Commissioner Robert Powelson said he welcomed the conference and also praised PJM CEO Andy Ott for “step[ping] up on this issue.”

PJM is expected to issue a white paper in March on the subject.

CAISO Proposes TO-focused Black Start Procurement

By Robert Mullin

CAISO’s straw proposal for procuring black start resources would entail significant collaboration with affected transmission owners.

The draft plan also calls for costs to be allocated to the transmission owner area in which the black start resource is located, rather than across the entire CAISO footprint, as the ISO initially considered.

The ISO developed the proposal after identifying a need for additional black start resources in the transmission-constrained San Francisco Bay Area, which is served by Pacific Gas and Electric. (See CAISO Kicks off Initiative to Procure Black Start Resources.)

black start caiso
CAISO’s developed the black start procurement proposal to address a need to better prepare the transmission-constrained San Francisco area for system restoration. | Visit California

Black start resources serving the Bay Area are relatively far from population centers, unlike in Southern California, where capability is more evenly distributed near major load centers and can provide a more rapid restoration.

The ISO’s initiative represents the second phase of a 2013 undertaking to address NERC reliability standard EOP-005-2, which requires transmission operators to develop plans for system restoration following blackouts.

Under the proposal, CAISO and the TO would jointly develop specifications describing the requirements and selection criteria for the black start resource. Criteria could include generator minimum load, the unit’s proximity to critical loads, interconnection voltage, megawatt output and reactive power capabilities and type of unit.

Responses to the subsequent procurement would be turned over to the TO, which would evaluate them against the selection criteria and then submit a written recommendation to CAISO.

The ISO would then evaluate the TO’s recommendation and approve or reject the choice. Once a resource is approved, CAISO would begin the contracting process with both the black start resource owner and TO.

“The length of any contractual commitment by the ISO and the black start service provider carry different risks and benefits to each party,” CAISO said in its proposal. “A longer commitment term to the ISO will provide greater certainty of sufficient black start capability, but the ISO may also want reasonable exit provisions to address changes in circumstances.”

CAISO is considering basing compensation on a cost-of-service approach rather than providing a capacity-type payment sufficient to support an otherwise unprofitable generator in operation.

“These arrangements should be expected to provide some reasonable expectation of cost recovery and margin to the black start service provider, but predicated on the basis that the resource is providing an incremental service — as opposed to an RMR [reliability-must-run] arrangement,” the ISO said.

CAISO is also considering a standard five- or 10-year contract with a clause requiring one year’s notice for termination in order to provide sufficient time to obtain a replacement resource or reach an RMR agreement to keep the contracted resource in place until a replacement is in service.

Under the proposal, the ISO would allocate the black start contract costs to the host TO, which could then recover the expense from its customers through its reliability services rate schedule. The ISO will likely need to revise its own Tariff to include black start services in the schedule.

“CAISO recognizes this approach would allocate incremental black start costs to all transmission customers within a PTO [participating transmission owner] transmission access charge area. However, to the extent this capability assists in restoring the PTO’s system, all transmission customers will benefit from this restoration,” the ISO said.

CAISO has scheduled a Feb. 21 call to discuss the proposal and is asking stakeholders to submit comments by Feb. 28. ISO staff are specifically seeking input on the proposed contract terms.

PJM Board OKs $1.5B in Transmission Upgrades

PJM’s Board of Managers on Wednesday approved more than $1.5 billion in transmission upgrades, led by a project to rebuild aging lines in Burlington, Mercer and Middlesex counties in New Jersey.

The project, in the territory of Public Service Electric and Gas, will replace transmission equipment as old as 80 years. It will rebuild and upgrade the 138-kV lines in the Metuchen-Edison-Trenton-Burlington corridor to 230 kV.

“The growing need to replace aging infrastructure, energy efficiency and the resulting reduction in the growth of demand for electricity are affecting transmission development,” PJM CEO Andy Ott said in a statement. “The current round of projects approved by the board reflects the trend.”

Other projects approved include transformer replacements and line rebuilds in the PSE&G, Metropolitan Edison, PPL, American Electric Power, Dominion, and Duke Energy Ohio and Kentucky areas.

PJM has now authorized more than $30.8 billion in transmission additions and upgrades in its Regional Transmission Expansion Plan since 2000.

PJM’s Board of Managers on Wednesday approved more than $1.5 billion in transmission upgrades, led by a project to rebuild aging lines in Burlington, Mercer and Middlesex counties in New Jersey.

The project, in the territory of Public Service Electric and Gas, will replace transmission equipment as old as 80 years. It will rebuild and upgrade the 138-kV lines in the Metuchen-Edison-Trenton-Burlington corridor to 230 kV.

pjm board transmission upgrades
Helicopter repairing transmission line | PSEG

“The growing need to replace aging infrastructure, energy efficiency and the resulting reduction in the growth of demand for electricity are affecting transmission development,” PJM CEO Andy Ott said in a statement. “The current round of projects approved by the board reflects the trend.”

Other projects approved include transformer replacements and line rebuilds in the PSE&G, Metropolitan Edison, PPL, American Electric Power, Dominion, and Duke Energy Ohio and Kentucky areas.

PJM has now authorized more than $30.8 billion in transmission additions and upgrades in its Regional Transmission Expansion Plan since 2000.

Questions Linger over CAISO Small TO Interconnection Proposal

By Robert Mullin

Stakeholders have lingering questions about CAISO’s proposal to protect small transmission owners from bearing the costs of network upgrades needed to interconnect generation serving load outside their service territories.

While the proposal was introduced to accommodate the specific circumstances faced by Valley Electric Association, the most recent draft allows CAISO to apply the plan to other small TOs that may  join the ISO in the future. (See CAISO Issues Final Plan for Small TO Interconnection Costs.)

It was the ISO’s effort to retain that flexibility that prompted most stakeholder concerns.

“If we’re really trying to make this specifically helpful for this particular instance, it makes a lot of sense for us to make this as narrowly applicable as possible,” John Newton, a regulatory analyst at Pacific Gas and Electric, said during a Feb. 13 call to discuss the proposal.

Under the proposal, CAISO would examine case-by-case whether a TO should be allowed to fold low-voltage generator interconnection costs into high-voltage transmission revenue requirements — which would spread those costs across the ISO’s full rate base to avoid burdening ratepayers of small TOs with outsized fees.

Without the change, a $5 million network upgrade would increase Valley Electric’s low-voltage transmission access charge (TAC) by 18.75% to $7.44/MWh, said Steve Rutty, CAISO’s director of grid assets. A $25 million upgrade would nearly double the utility’s low-voltage TAC to $12.15/MWh.

caiso interconnection proposal
The table shows the approximate increase in each TOs low-voltage TAC for network upgrade costs on their respective systems under CAISO’s current cost allocation methodology. | CAISO

By contrast, spreading the $25 million upgrade across the entire ISO would result in a 0.09% increase in the combined high-voltage and low-voltage TACs for Valley Electric and PG&E, while Southern California Edison would see a 0.06% bump.

Proposed Criteria

The ISO will determine eligibility for the relief based on whether the TO is:

  • Very small relative to other TOs, with a gross load of 2 million MWh or less (currently about 2.2% of the load of the ISO’s largest TO);
  • Located in a renewable resource-rich area gaining “elevated” interest for generator procurements; or
  • Not subject to a renewable portfolio standard or does not need the new interconnecting generation to meet that requirement.

Joseph Abhulimen, program and project supervisor at the California Public Utilities Commission’s Office of Ratepayer Advocates (ORA), wondered how the ISO landed on the 2 million MWh threshold, nearly triple Valley Electric’s load.

“Why is that number significant?” Abhulimen asked.

“Originally, in the draft proposal, we had proposed 5% [of the largest TO’s load], which would’ve equated to around 4 million MW,” Rutty said. “It would allow a utility such as [Valley Electric] to really significantly increase their size.”

Some stakeholders thought the 5% figure was too generous, Rutty explained, so the ISO narrowed it down to closer to 2%.

“We also wanted an even number, so we picked 2 million [MWh],” Rutty said. “The reason why we’re sticking at a fixed number is so that it’s not a moving target on them. As you know, loads change over time.”

The ISO was also concerned that a lower gross load threshold could subject relatively small TOs — and their ratepayers — to sharply increased low-voltage TAC rates once they exceeded the cap, Rutty noted.

‘Resource Rich’

Abhulimen also wondered about how the ISO would determine what qualifies as a “resource-rich” area. “What is the primary determinant for that designation?” he asked.

Bill Weaver, CAISO senior counsel, said the term was intended to allow case-by-case, rather than formulaic, determinations.

Stakeholders “can go to our board, they could comment at FERC, and we could really make a case-by-case determination whether we think someone meets this criteria, rather than trying to establish a bright-line test that may prove infeasible for future areas,” Weaver said.

“I’m still very concerned that I would have expected that there would be certain criteria established that would say that this particular [TO] is in a resource-rich area for X and Y reasons,” Abhulimen said. “It’s very hard for someone to comment on this particular principle when you don’t know what criteria were used to make this determination.”

Kallie Wells of Resero Consulting stumped ISO staff with a question about whether the proposal would apply to TOs that don’t serve any load.

“Most likely that would be something we would have to take up on a case-by-case basis with a different set of criteria,” Rutty said. “I don’t know that we would have any low-voltage, transmission-only type [TOs] that would be under 200 kV under those scenarios. But if it did come into play we would have to take a look at it at that time.”

PG&E’s Newton wondered how the new proposal would apply with the potential for the ISO to expand into other parts of the West. “Do you anticipate that is policy will apply broadly?” he asked.

Rutty replied that it — and anything in the Tariff — would be applied to similarly situated customers.

“That said, we’re not hiding anything here,” Rutty said. “We’re not trying to sneak this in. We have no new [TO] with less than 2 million MWh in the pipeline for [TO] participation.”

Gaming Concerns

Charles Mee of the California ORA posed what he called an “extreme” hypothetical situation in which a small TO contracts with external resources to serve all of its local load while all generation within its area is contracted to serve load in other TOs — thereby evading any upgrade costs being rolled into its low-voltage TAC.

“So do you consider all the generators that, contractually, are not serving the local load be qualified for this treatment?” Mee asked.

“I think so,” Rutty responded. “We see what you’re getting to — that we don’t want to create a system that can be gamed. But at the same time, we want to ensure that each [TO] can find the lowest-cost capacity for its load-serving needs, which is why we started this” proposal.

Rutty added he couldn’t imagine Mee’s hypothetical being cost-efficient for a transmission-owning utility and that any hint of manipulating the system could result in a “very easy” Section 206 complaint at FERC.

“I think we need to think about that, so include it in your comments,” he added.

Comments on the proposal must be submitted to CAISO by Feb. 22. The ISO expects to seek approval for the plan at next month’s Board of Governors meeting March 15-16.

FERC Defends PJM Capacity Performance Before DC Circuit

By Rory D. Sweeney

WASHINGTON — A group of environmentalists, regulators and public power advocates told the D.C. Circuit Court of Appeals on Tuesday that it should overturn PJM’s Capacity Performance construct, saying it was fast-tracked into implementation without proper review and discriminates against renewable generators and demand response (16-1234, 16-1235, 16-1236, 16-1239).

ferc pjm capacity performance
E Barrett Prettyman Federal Courthouse

PJM developed CP in response to increasing generation forced outage rates, which peaked at 22% during the 2014 polar vortex  cold snap, when the RTO had to implement emergency procedures to avoid blackouts. CP phased out seasonal resources and increased both bonuses for overperformance and penalties for nonperformance.

FERC approved PJM’s plan — which was submitted without stakeholder approval — in June 2015, saying the changes were justified by “the combination of deteriorating resource performance and the ongoing change in the resource mix in the PJM region.” (See FERC OKs PJM Capacity Performance: What You Need to Know.)

FERC’s approval is being challenged by a group including the American Public Power Association, National Rural Electric Cooperative Association, New Jersey Board of Public Utilities, Public Power Association of New Jersey, Natural Resources Defense Council, Sierra Club, Union of Concerned Scientists, American Municipal Power and the Advanced Energy Management Alliance.

High Costs, Ignored Alternatives

“The common thread in all of these appeals is that PJM rushed to assemble its Capacity Performance proposal, and FERC rushed to approve it, ignoring any alternative proposals despite the proposal’s high cost to consumers, its discriminatory effect on certain capacity resources and other flaws,” APPA attorney Randolph Elliott said. “This is like getting to the 5-yard line and having the referee push you over the goal line, or hitting a triple and having the umpire wave you home.”

The opponents argue FERC failed to demand sufficient evidence that PJM’s proposal would result in just and reasonable rates, saying that while the increased costs of the new requirements have been estimated, there was no attempt to quantify the reliability benefits it would produce.

They also contend that limiting capacity bidders to year-round resources discriminates against renewables and DR and that FERC unreasonably imposed limits on aggregating resources across locational deliverability areas. Also under dispute are PJM’s default offer cap, its unit-specific operating parameters and the design of its nonperformance penalties.

“It’s undisputed that PJM did not have the authority to make all of these changes unilaterally,” Elliott said. “The proposal was so controversial among the stakeholders that PJM did not even try to get the support they needed to file it unilaterally under [Section 205 of the Federal Power Act], so they elected to file this Section 206 complaint along with the other Tariff changes they filed under Section 205. … FERC said that the unilateral Tariff changes that PJM had made were just and reasonable, but then it turned around and said, ‘Because you did those, you’ve rendered your operating agreement and some other provisions in your Tariff unjust and unreasonable.’ Now how could those both be true at the same time? So they then turned around and granted the complaint, and said, ‘In light of the changes that you’ve made unilaterally, we have no choice but to grant your complaint.’”

ferc pjm capacity performance
Price | Jenner & Block

Judge Janice Rogers Brown asked if it would have been acceptable for FERC to initiate the Section 206 filing. Elliott argued no. But Matthew E. Price, representing CP supporter Exelon, later argued that it’s well within FERC’s purview to also order parallel revisions when an order is issued.

‘Strange Result’

“It would be a very strange result if the law were somehow different because PJM had initiated the 206 proceeding and pointed out to FERC, ‘Hey, here are some areas where you might want to consider making some changes,’ rather than leaving FERC to hunt around in other tariffs and identify changes that might need to be made,” he said.

Carol Banta, an attorney from FERC’s Office of General Counsel, defended the commission’s order approving CP, saying FERC fairly and carefully weighed PJM’s proposal and is entitled to deference in its conclusion. She noted that the commission found the proposal not unreasonably discriminatory toward any stakeholder.

FERC approved the proposal, she said, because it transferred the risk for performance from consumers to suppliers. The 2014 outages were a “conflation of events that really showed a number of weaknesses in the system,” she said. “It showed that we were already paying for reliability that we weren’t getting.

“When we talk about what are the reliability benefits that customers are getting for what they’re paying, it’s also in the context of what they were getting and not getting before,” she said. “A conventional resource, if it’s unable to guarantee its performance, it can fix something: It can upgrade its equipment; it can firm up its fuel arrangements. It has options, and actually this entire market proposal is to put those risks on suppliers. … If you have a wind farm, you can’t order more wind, so the commission agreed that it’s a reasonable accommodation for resources that couldn’t improve their performance just by making investments to allow them to still participate in these markets.”

Dictating Terms

This exemption for intermittent resources, like wind and solar, to aggregate their production so they can also guarantee year-round performance remained a focus throughout the hearing for Senior Judge David Sentelle. He asked why the commission hadn’t allowed conventional resources, like natural gas- and coal-fired plants, to also aggregate.

“PJM is not supposed to be dictating the terms here,” he said. “I can understand why aggregation would be a good thing, but would it not then be a better thing if they were allowed to cross-aggregate with traditional resources?”

Allowing such aggregation would create opportunities for companies to exercise market power, Price pointed out.

The technical aspects of the case appeared to be a challenge for the judges to hash out beyond the legal questions.

“There are many things in this case I don’t fully understand,” Senior Judge A. Raymond Randolph said. “What exactly is a delivery area, and second of all, why wouldn’t they be allowed to [aggregate] across delivery areas?”

“PJM didn’t provide the level of detail that the commission needs to approve that,” Banta said. “That could still happen.”

Price explained that the delivery areas are defined by transmission constraints, so resources “wouldn’t necessarily be able to deliver energy” to other areas.

Randolph also asked if any stakeholders had challenged that decision, and Banta said that American Municipal Power had made it part of its appeal.

ferc pjm capacity performance
Desormeau | NRDC

Cost vs. Benefits

Also participating in the nearly hour-long hearing was attorney Katherine Desormeau for the NRDC, who focused on CP’s cost versus the value of its benefits.

“PJM has acknowledged from the outset that this proposal will increase costs on consumers, but it did not support its final proposal with any evaluation of the costs,” she said. “And it didn’t attempt to evaluate the reliability benefit that was the purpose of the Capacity Performance proposal. … [FERC concludes] that the costs will be outweighed by benefits, but we have no way of knowing what FERC thought that was.”

Price replied that the proposal was designed to meet PJM’s reliability objective of no more than one outage every 10 years. “That reliability standard is a bedrock principle of capacity market design that goes back many years and is true in all of the regions under FERC’s authority,” he said. “When you hear petitioners complain about the costs of this program, what they’re complaining about are the costs of achieving that standard. What they’re really arguing to you is that standard is problematic because it costs too much and they’re willing to tolerate more risk, but that standard was not litigated in this proceeding. … Petitioners should not be able to make essentially a collateral attack on this well-settled reliability standard by complaining about the costs of the program.”

In their final brief, the challengers noted that the commission approved CP on a split vote, citing former Chairman Norman Bay’s dissent. (See Norman Bay’s Dissent: ‘Two Carrots and a Partial Stick’.)

FERC’s final brief cited precedents in which the agency’s decisions have been given “great deference,” saying its factual findings should be considered conclusive if supported by “substantial evidence” — “more than a scintilla, but … less than a preponderance of the evidence,” the standard in civil trials.

The D.C. Circuit also has pending before it a challenge to ISO-NE’s similar Pay for Performance rules (New England Power Generators Association v. FERC, D.C. Cir. Nos. 16-1023, 16-1024). Banta noted that in both cases, FERC has said it’s reasonable for all capacity resources to be expected to perform year-round “regardless of technology type.”

SPP First RTO to 50% Wind Energy Penetration Level

By Tom Kleckner

ERCOT may have more wind, but SPP can lay claim to becoming the first North American RTO to obtain more than half of its power from it.

At 4:30 a.m. Sunday, SPP’s footprint generated 11,419 MW of wind energy at the same time its load was 21,919 MW. The wind-penetration mark of 52.1% broke the RTO’s previous record of 48.2%, set last April, and ended a friendly battle with ERCOT to see who could reach the 50% level first.

The two neighboring grid operators sit in the nation’s most wind-rich regions. Texas may top all other states with more than 20 GW of installed capacity — with ERCOT managing more than 17 GW of that — but SPP and its 14-state footprint is not far behind, with more than 16 GW of installed capacity and another 21 GW in the interconnection queue.

In the early 2000s, SPP counted less than 400 MW of wind energy, reporting it as “Other” in its fuel-mix data. Wind now makes up about 15% of the RTO’s nameplate generating capacity, trailing only natural gas and coal generation.

SPP added 4,000 MW of wind capacity in 2016, boosting its maximum simultaneous wind generation peak from 9,948 MW to 12,336 MW. It has set seven peaks for wind generation since last year, the latest coming Feb. 9 at 13,342 MW. Staff has even thrown out a 60% penetration number, saying it expects to crack that level this April.

“Ten years ago, we thought hitting even a 25% wind-penetration level would be extremely challenging, and any more than that would pose serious threats to reliability,” SPP Vice President of Operations Bruce Rew said in a statement. Fifty percent “is not even our ceiling. We continue to study even higher levels of renewable, variable generation.”

Several stakeholder groups are already at work trying to determine how best to add even more wind to SPP’s 550,000-square-mile footprint. The RTO has approved more than $10 billion in transmission infrastructure over the last decade, much of it to connect rural, isolated Midwest wind farms to distant population centers. (See “Stakeholders Try to Grasp Wind Energy’s Implications,” SPP Board of Directors/Members Committee Briefs.)

spp wind energy

The RTO is holding a two-day Variable Generation Integration Workshop this week at its corporate headquarters in Little Rock, Ark. Staff will provide a deep dive on the second analysis it has performed on variable generation resources during the last several years. The study focused on system requirements needed to operate reliably at higher penetration levels while calling on fossil fuel resources to compensate for drops in wind production.

“If we start pushing 12 to 15 GW of output, we’re at the point where we should be concerned,” SPP’s Casey Cathey, manager of operations analysis and support, told the Markets and Operations Policy Committee last month. “We’re not trying to say the sky is falling, but it’s important we have a grip on the traditional resources and that we leverage them, as opposed to manually pushing more resources online in case the wind drops.”

IPPs File Challenge to Illinois Nuclear Subsidies

By Rich Heidorn Jr.

Independent power producers on Tuesday filed suit in federal court challenging Illinois’ zero-emission credits for Exelon’s Quad Cities and Clinton nuclear plants, calling the program “illegal and unfair.”

The lawsuit seeks to overturn the Future Energy Jobs Act, which authorized the ZEC program, contending the law violates FERC jurisdiction over the wholesale electricity market.

nuclear subsidies zero emission credits
Exelon’s Clinton Nuclear Plant | Nuclear Regulatory Commission

It was filed in the Northern District of Illinois, Eastern Division, by the Electric Power Supply Association (EPSA), Dynegy, Eastern Generation, NRG Energy and Calpine, naming the Illinois Power Agency and the Illinois Commerce Commission as defendants (1:17-cv-01164).

Jonathan Schiller, a managing partner of the plaintiffs’ attorneys Boies, Schiller & Flexner, said Illinois’ legislation will fail for the same reason that the Supreme Court last year unanimously rejected Maryland’s attempt to subsidize a combined cycle plant. (See Supreme Court Rejects MD Subsidy for CPV Plant.)

“The Hughes [v. Talen Energy] decision clearly stated subsidies tied to wholesale power market prices — such as ZECs — are plainly illegal. The ZEC program is designed to allow Illinois to take actions that directly affect the wholesale electric market in an attempt to replace the federally regulated market prices with costs determined by the state instead,” Schiller said. “The credits are directly tied to the Illinois nuclear plants’ participation in interstate energy markets and are unconstitutional as a result.”

The plaintiffs cite an estimate that the out-of-market payments will total $235 million annually over 10 years.

Separately, EPSA also made two filings with FERC calling for expedited action to reject the ZEC programs in Illinois and New York.  New York’s program also has been challenged, despite regulators’ contention that the program was designed to avoid the jurisdictional problems cited by the court in Hughes.

EPSA said its filings — answers to other parties’ comments — argue “that there is no merit to the procedural or substantive objections raised, urging the commission to act decisively and without delay” (EL16-49, EL13-62).

The commission, however, will be unable to act until a third commissioner is confirmed to restore its quorum.

EPSA noted with alarm that officials in Connecticut, New Jersey and other states are considering ZEC-type supports for their nuclear fleets.

“The commission should not allow opposing parties to obfuscate matters and should remain focused on the issue at hand to address the recognized threat to the markets through imposition of a minimum offer price rule (MOPR) on existing units for the capacity auctions used in New York and PJM to protect consumers and markets,” EPSA President John E. Shelk said in a statement. “FERC should take this corrective action and then work with all stakeholders on fuel-neutral market reforms and state concerns consistent with competitive market principles.”

Commissioners Ask MISO to Share Tx Project Cost Data

By Amanda Durish Cook and Rich Heidorn Jr.

WASHINGTON — Texas Public Utility Commissioner Ken Anderson and other state regulators sharply questioned MISO officials Monday over its refusal to share with them raw cost data on transmission projects.

miso transmission project cost data closed meeting
Anderson | © RTO Insider

The exchange came during an in-person gathering of the Organization of MISO States Board of Directors at the winter session of the National Association of Regulatory Utility Commissioners.

OMS President and Indiana Utility Regulatory Commissioner Angela Weber, who has been calling for the organization to be more transparent itself, joined Anderson in pressing the RTO.

Anderson was already riled up when he arrived about 10 minutes late for the OMS meeting, having gotten lost looking for the conference room in an interior hallway of the Renaissance Hotel. He burst into the meeting, arms waving and complaining that the session had been scheduled in an unnumbered room. “There is a number outside,” Weber calmly informed him before going on with a discussion of an appeals court brief.

miso transmission project cost data closed meeting
Weber | © RTO Insider

Minutes later, Anderson was steamed up again. Priti Patel, manager of customer and state and regulatory affairs for MISO North, was explaining that the RTO aggregates cost data from transmission developers before sharing the figures with state commissions because it considers them proprietary information.

“This is the problem in MISO … really? Proprietary?” Anderson asked testily.

Weber and other regulators at the Feb. 13 meeting also expressed dismay and called on MISO to provide more visibility on project costs.

The discussion ended when — at the urging of Iowa Utilities Board Member Libby Jacobs — Patel agreed to ask her superiors whether state regulators could sign confidentiality agreements to be privy to the more granular information as the RTO receives it from the developers.

Before FERC Order 1000, Patel had explained, MISO only required “minimal” project information such as facility statuses and in-service dates. New Tariff requirements dictate that developers provide the RTO with regulatory status, right-of-way status, permitting status, and design and engineering status. She said MISO can investigate causes of schedule delays and cost overruns greater than a 25% deviation from the budget.

miso transmission project cost data closed meeting
Patel | © RTO Insider

While MISO’s monitoring could intersect with state regulators, the RTO is not infringing on states’ rights, Patel said, reminding OMS members that MISO does not determine rates. “We’re not there to judge the prudency of a cost,” she said.

MISO gives more weight to operations and maintenance planning than construction costs when evaluating project bids, Patel said. “What we’re evaluating is the actual infrastructure,” she said. Patel added that developers are keenly aware of costs, however, noting that 10 of the 11 bidders on MISO’s competitive Duff-Coleman project wrote a cost cap into their proposals.

OMS Executive Director Tanya Paslawski said ratemaking power ultimately lies with FERC, and both MISO and states “are limited in what they can do.”

Weber said state access to developer information varies from state to state, pointing out that commissioners in Indiana do not have access to cost information.

OMS Reviewing Own Transparency

OMS is also reassessing the appropriateness of using closed sessions during its meetings.

The topic came up in early February after some OMS members requested a closed session to discuss MISO and PJM’s FERC filing to implement targeted market efficiency projects (TMEPs). Weber said some members wanted a closed session to discuss different state viewpoints of the TMEP. She questioned whether OMS should use closed sessions for simple disagreements.

miso transmission project cost data closed meeting
The Organization of MISO States Board of Directors had an in-person meeting Monday at the NARUC winter session in Washington. | ©  RTO Insider

“I felt that … it’s a very broad interpretation of closed meetings. Once you get into that broad interpretation, there are going to be more and more closed meetings,” Weber said at a Feb. 2 OMS Executive Committee meeting.

OMS bylaws dictate that meetings be generally open because they are composed of public commissions.

Weber said the organization could clarify the language that permits closed sessions only when strategy on a FERC filing is discussed.

OMS should not enter closed session every time a legal issue comes up in discussion, she said. “Almost everything we do touches on legal” proceedings.